Nikki Gonzales
Nick Goetz
Bryan Obida

We are online

Monday - Friday 6AM - 6PM PST

AZM 161 Z ST1-AS RA Schmersal Electronic Components

Schmersal AZM 161 Z ST1-AS RA AS interface safety at work; Safety switchgear; Solenoid supply AUS AS interface; Guard locking monitored; Manual release; Solenoid interlock; Thermoplastic enclosure; High holding force 2000; 130 mm x 90 mm x 30 mm; Interlock with protection against inco
Schmersal

Part#:AZM 161 Z ST1-AS RA

Manufacturer:Schmersal

Alt. Part#:101209104

Product Lifecycle:Active

Get a quick Quote!

About the product: AS interface safety at work; Safety switchgear; Solenoid supply AUS AS interface; Guard locking monitored; Manual release; Solenoid interlock; Thermoplastic enclosure; High holding force 2000; 130 mm x 90 mm x 30 mm; Interlock with protection against inco

About the manufacturer: Schmersal is one of the manufacturers that offers Electronic Components that you can order at Quotebeam.com. Schmersal produces a wide range of high-quality switchgears specifically engineered to protect machinery and facilities in industrial automation and the elevator industry.

Check out the AZM 161 Z ST1-AS RA Schmersal price in the box on the right side or send a quick quote.

AZM 161 Z ST1-AS RA Product Details

  • Note (AS-i Input module address)
    Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
  • AS-i Input module address
    0
  • Note (AS-i Parameter bits)
    Set the parameter outputs to "1111" (0xF), FID: periphery error
  • AS-i Parameter bits, P3
    Error message - locking/unlocking of the solenoid interlock blocked
  • AS-i Parameter bits, P0
    Actuator detected
  • AS-i Parameter bits, P2
    Magnet voltage in tolerance range
  • AS-i Parameter bits, P1
    Solenoid interlock locked
  • AS-i Outputs, DO 2
    No Function
  • AS-i Outputs, DO 3
    No Function
  • AS-i Outputs, DO 1
    No Function
  • AS-i Outputs, DO 0
    Solenoid control
  • AS-i Input, Channel 2
    Data bits DI 2 / DI 3 = dynamic code transmission
  • AS-i Input, Channel 1
    Data bits DI 0 / DI 1 = dynamic code transmission
  • AS-i, ID-Code2
    0xE
  • AS-i, ID-Code1
    0xF
  • AS-i Profile
    S-7.B.F.E
  • AS-i, ID-Code
    0xB
  • AS-i, IO-Code
    0x7
  • AS-i Specification
    Safety-Slave
  • AS-i Current consumption, maximum
    250 mA
  • AS-i Version
    V 2.1
  • Note (AS-i Operating voltage)
    Protection against polarity reversal
  • Overvoltage category
    III
  • AS-i Operating voltage, minimum
    26.5 VDC
  • AS-i Operating voltage AS-i maximum
    31.6 VDC
  • Switching frequency
    1,000 /h
  • Degree of pollution to VDE 0100
    3
  • Protection rating
    II
  • Restistance to shock
    30 g / 11 ms
  • Rated insulation voltage Ui
    32 VDC
  • Rated impulse withstand voltage Uimp
    0.8 kV
  • Note (Relative humidity)
    non-condensing, non-icing
  • Resistance to vibrations to EN 60068-2-6
    10 Hz ... 150 Hz, amplitude 0.35 mm
  • Relative humidity, maximum
    95 %
  • Storage and transport temperature, minimum
    -25 °C
  • Storage and transport temperature, maximum
    +85 °C
  • Ambient temperature, maximum
    +60 °C
  • Relative humidity, minimum
    30 %
  • Ambient temperature, minimum
    -25 °C
  • Degree of protection
    IP67 to EN 60529
  • Height of sensor
    90 mm
  • Clamping force
    2,000 N
  • Length of sensor
    30 mm
  • Actuating speed, maximum
    2 m/s
  • Terminal Connector
    Connector plug M12, 4-pole, (A-coding)
  • Width of sensor
    130 mm
  • Connector position
    Bottom
  • Actuating play in direction of actuation
    5.5 mm
  • Power to lock
    Yes
  • Latching force
    30 N
  • Mechanical life, minimum
    1,000,000 Operations
  • Manual release
    Yes
  • Enclosure material
    Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
  • Number of actuating directions
    3
  • Reaction time, maximum
    100 ms
  • Active principle
    electromechanical
  • Integral System Diagnostics, status
    Yes
  • Guard locking monitored
    Yes
  • Gross weight
    465 g
  • Standards
    IEC 61508, EN 60947-5-1, EN 62026-2

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used surplus in original packaging with original factory seal.


Related documents AZM 161 Z ST1-AS RA Specs

1-year warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

AZM 161 Z ST1-AS RA

Select Qty:

Average response time: 11 minutes

Shipping and Delivery Worldwide

calculate costs and time


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo