​
Bryan Obida

Live support:

Monday - Friday 6AM - 6PM PST

PILZ-402230 Pilz Control Circuits

Pilz PILZ-402230 Pilz PILZ-402230 is an electronic selector switch featuring an LED status indicator. It operates within an ambient air temperature range of -20 to +60°C and has a net height of 55 mm. Designed with 3 operating modes and a 0x1111 coding type battery-free transponder, it offers both plug-in/detachable spring-loaded and screw terminal connections. This selector switch is IP65 rated for protection and requires a supply voltage of 20.4-26.4Vdc, with a nominal 24Vdc. It operates at a frequency of 125kHz with passive transponder technology. The front housing is made of ABS material, and the bottom is ST/10μ Zn, supporting a maximum cable length of 1000m and a 9mm stripping length for spring-loaded terminal connections. The net width and depth are 98 mm and 43 mm, respectively. It can accommodate wire cross-sections ranging from 0.25 to 1.5mm2 (28AWG to 16AWG) for screw terminal connections and 0.2 to 2.5mm2 (24AWG to 12AWG) for spring-loaded connections. The sensing distance is 5mm. Storage temperature range is -20 to +70°C. It features 13 x positive-switching 1-pole semiconductor outputs with specific voltage and current characteristics, short-circuit protection, and various response times for different operations. The rated impulse voltage is 0.8 kV, with a rated insulation voltage of 60 V. It also includes 3 x digital inputs with specified signal levels and a time delay of 1s after supply voltage application.
Pilz

Part#:PILZ-402230

Manufacturer:Pilz

Product Lifecycle:Active

Get a quick Quote!

Pilz PILZ-402230 is an electronic selector switch featuring an LED status indicator. It operates within an ambient air temperature range of -20 to +60°C and has a net height of 55 mm. Designed with 3 operating modes and a 0x1111 coding type battery-free transponder, it offers both plug-in/detachable spring-loaded and screw terminal connections. This selector switch is IP65 rated for protection and requires a supply voltage of 20.4-26.4Vdc, with a nominal 24Vdc. It operates at a frequency of 125kHz with passive transponder technology. The front housing is made of ABS material, and the bottom is ST/10μ Zn, supporting a maximum cable length of 1000m and a 9mm stripping length for spring-loaded terminal connections. The net width and depth are 98 mm and 43 mm, respectively. It can accommodate wire cross-sections ranging from 0.25 to 1.5mm2 (28AWG to 16AWG) for screw terminal connections and 0.2 to 2.5mm2 (24AWG to 12AWG) for spring-loaded connections. The sensing distance is 5mm. Storage temperature range is -20 to +70°C. It features 13 x positive-switching 1-pole semiconductor outputs with specific voltage and current characteristics, short-circuit protection, and various response times for different operations. The rated impulse voltage is 0.8 kV, with a rated insulation voltage of 60 V. It also includes 3 x digital inputs with specified signal levels and a time delay of 1s after supply voltage application.

About the manufacturer: Pilz is one of the manufacturers that offers Control Circuits that you can order at Quotebeam.com. We are at the forefront of driving the evolution of industrial automation. Our company ethos is built on dedication and principles, placing a high priority on safety. Over the years, we have been devoted to creating cutting-edge products and solutions tailored to our customers' requirements.

Check out the PILZ-402230 Pilz price in the box on the right side or send a quick quote.

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging

PILZ-402230 Description

Pilz PILZ-402230 is an electronic selector switch featuring an LED status indicator. It operates within an ambient air temperature range of -20 to +60°C and has a net height of 55 mm. Designed with 3 operating modes and a 0x1111 coding type battery-free transponder, it offers both plug-in/detachable spring-loaded and screw terminal connections. This selector switch is IP65 rated for protection and requires a supply voltage of 20.4-26.4Vdc, with a nominal 24Vdc. It operates at a frequency of 125kHz with passive transponder technology. The front housing is made of ABS material, and the bottom is ST/10μ Zn, supporting a maximum cable length of 1000m and a 9mm stripping length for spring-loaded terminal connections. The net width and depth are 98 mm and 43 mm, respectively. It can accommodate wire cross-sections ranging from 0.25 to 1.5mm2 (28AWG to 16AWG) for screw terminal connections and 0.2 to 2.5mm2 (24AWG to 12AWG) for spring-loaded connections. The sensing distance is 5mm. Storage temperature range is -20 to +70°C. It features 13 x positive-switching 1-pole semiconductor outputs with specific voltage and current characteristics, short-circuit protection, and various response times for different operations. The rated impulse voltage is 0.8 kV, with a rated insulation voltage of 60 V. It also includes 3 x digital inputs with specified signal levels and a time delay of 1s after supply voltage application.

1-year warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of Pilz

Shipping and Delivery Worldwide

calculate costs and time

Secure Payment Processing

with money back guarantee

1 year warranty

on all parts

Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Pilz Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Pilz Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Pilz, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

This item can ship within 24h!

ESV371N01SXB Part Image. Manufactured by Lenze.

ESV371N01SXB

$345.89

Verified stock: 6

Lenze ESV371N01SXB is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter designed for control cabinet or surface/wall mounting. It operates within an ambient air temperature range of -10 to +55 °C, with a derating of 2.5% per °C above +40 °C. This model features 1 x analog output (0-10Vdc) at Terminal 5, and its degree of protection is NEMA 1 IP31. The dimensions are H190mm x W99mm x D111mm. It includes 1 x digital output (NPN; 24Vdc / 50mA) at Terminal 14, 1 x analog input (0-10Vdc) at terminal 5, 1 x analog input (4-20mA) at terminal 25, and multiple digital inputs (PNP/NPN logic) at terminals 1 START/STOP, 13A, 13B, 13C, and 13D. Protection functions cover earth fault, phase loss, overvoltage, under voltage, motor stalling, over temperature, motor overload (125% of FLA), and short circuit (SCCR = 200kA at rated voltage). Designed for indoor use only with a frame size G1, it supports a supply voltage of 120Vac / 240Vac and a network frequency of 48-62 Hz (input) and 0-500 Hz (output). This model does not include a communication interface, has a rated current of 2.4A for both 120Vac and 240Vac, operates on a single-phase / 1P network, and offers a rated active power of 0.37kW and rated power of 1/2HP for the same voltage range.

Lenze

This item can ship within 24h!

ESV752N04TXB Part Image. Manufactured by Lenze.

ESV752N04TXB

$1,214.09

Verified stock: 9

Lenze ESV752N04TXB is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter designed for control cabinet or surface/wall mounting. It operates within an ambient air temperature range of -10 to +55 °C, with a derating of 2.5% per °C above +40°C. This model features 1 analog output (0-10Vdc) at Terminal 5, and its degree of protection is NEMA 1 IP31. The dimensions are H250mm x W130mm x D160mm. It includes 1 digital output (NPN; 24Vdc / 50mA) at Terminal 14, and its analog inputs consist of 1 x analog input (0-10Vdc) at terminal 5 and 1 x analog input (4-20mA) at terminal 25. Digital inputs include 1 x digital input (PNP/NPN logic) at terminal 1 for START/STOP and 4 additional digital inputs at terminals 13A, 13B, 13C, and 13D. Protection functions cover earth fault, phase loss, overvoltage, under voltage, motor stalling, over temperature, motor overload (125% of FLA), and short circuit (SCCR = 200kA at rated voltage). Designed for indoor use only with a frame size H1, it supports a supply voltage of 400Vac / 480Vac and a network frequency of 48-62 Hz (input) and 0-500 Hz (output). This model does not include a communication interface, has a rated current of 16.1A (400Vac) and 14A (480Vac), and is suitable for a 3-phase (3P / 3AC) network. The rated active power is 7.5kW (400-480Vac), and the rated power is 10HP (400-480Vac).

Lenze

This item can ship within 5 days!

ATV71HD45N4Z Part Image. Manufactured by Schneider Electric.

ATV71HD45N4Z

$15,776.30

Verified stock: 1

Schneider Electric ATV71HD45N4Z is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar 71 series, designed for variable speed and frequency control with a U/F ratio of 2 points / 5 points. It features sensorless flux vector control, ENA System, and vector control with or without speed feedback, capable of delivering 220% of the nominal motor torque for 2 seconds and 170% of the nominal motor torque for 60 seconds. This model includes a built-in DC choke, EMC filter, non-detachable display, and built-in heatsink. It operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nominal), with dimensions of H630mm x W320mm x D290mm, and offers an IP20 UL type 1 degree of protection. The rated current is 94A at 380Vac (2.5kHz), 77A at 460Vac (2.5kHz), with a maximum current of 155A for 2 seconds and 141A for 60 seconds. It supports wall mounting, uses Modbus and CANopen communication protocols, and is designed for a 3-phase network with an output frequency range of 0.1-500 Hz. The unit has 1 analog output (0-10Vdc / 0-20mA), 5 digital inputs (24Vdc; sink/source) plus 1 programmable digital input and 1 PWR safety input, 3 digital outputs, and 2 analog inputs for comprehensive connectivity. The current consumption is 104A at 380Vac and 85A at 480Vac, with a rated active power of 45kW and rated power of 60HP.

Schneider Electric

This item can ship within 5 days!

ATV312H075M2 Part Image. Manufactured by Schneider Electric.

ATV312H075M2

$731.03

Verified stock: 1

Schneider Electric ATV312H075M2 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar 312 series designed for sensorless flux vector control with an energy-saving ratio of 170-200% of the nominal motor torque. It features a built-in EMC filter and heatsink, operates on a supply voltage of 170-264Vac (200Vac / 220Vac / 230Vac / 240Vac nom.), and has dimensions of H145mm x W72mm x D142mm. This model offers an IP21 degree of protection, a rated current of 4.8A at 200Vac with a 4kHz frequency, and can handle a maximum current of 7.2A for up to 60 seconds. It supports wall mounting and uses Modbus and CANopen communication protocols. Designed for single-phase networks with an output frequency range of 0.1-500 Hz, it includes 1 analog output (0-10Vdc), 1 analog output (0-20mA), 6 digital inputs (24Vdc; sink/source), 1 digital output (C/O SPDT relay contact), 1 digital output (NO relay contact), and 3 analog inputs for versatile connectivity. The current consumption is rated at 8.9A at 200Vac and 7.5A at 240Vac, with a rated active power of 750W / 0.75kW, equivalent to 1HP, and power dissipation/losses of 60 W.

Schneider Electric

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo