​
Nikki Gonzales
Nick Goetz
Bryan Obida

Live support:

Monday - Friday 6AM - 6PM PST

PILZ-328308 Pilz I/O Modules

Pilz PILZ-328308 Pilz PILZ-328308 is an I/O unit designed as a digital output electronic module with specific capabilities for handling inductive, capacitive, and resistive loads. It features potential isolation between semiconductor output and module supply, ensuring functional insulation with a rated surge voltage of 2500V. This unit is suitable for backplane or rackmount mounting modes and operates within an ambient air temperature range of 0 to +55°C. The device, with a net height of 110.8 mm and a design code of 0019h, includes 4 ST output bits plus 4 ST status bits. It supports a rated current of up to 3.5A max, with a detailed output current range and specific residual and transient pulsed output currents. Connection is facilitated via plug-in/detachable cage-clamp terminal connections. As a standard I/O module, it offers an IP20 degree of protection and requires a supply voltage of 16.8-30Vdc, with a nominal 24Vdc. The housing is made from PPE material, and the unit measures 12.5 mm in width and 72.5 mm in depth. It can be stored in temperatures ranging from -40 to +70°C. The module includes 4 digital outputs, each capable of positive-switching semiconductor outputs at 24Vdc and 2A. Power consumption and dissipation are detailed for various operational states, with a maximum power dissipation of 1.9 W. Processing times for output signals and the internal voltage drop are also specified.
Pilz

Part#:PILZ-328308

Manufacturer:Pilz

Product Lifecycle:Active

Get a quick Quote!

Pilz PILZ-328308 is an I/O unit designed as a digital output electronic module with specific capabilities for handling inductive, capacitive, and resistive loads. It features potential isolation between semiconductor output and module supply, ensuring functional insulation with a rated surge voltage of 2500V. This unit is suitable for backplane or rackmount mounting modes and operates within an ambient air temperature range of 0 to +55°C. The device, with a net height of 110.8 mm and a design code of 0019h, includes 4 ST output bits plus 4 ST status bits. It supports a rated current of up to 3.5A max, with a detailed output current range and specific residual and transient pulsed output currents. Connection is facilitated via plug-in/detachable cage-clamp terminal connections. As a standard I/O module, it offers an IP20 degree of protection and requires a supply voltage of 16.8-30Vdc, with a nominal 24Vdc. The housing is made from PPE material, and the unit measures 12.5 mm in width and 72.5 mm in depth. It can be stored in temperatures ranging from -40 to +70°C. The module includes 4 digital outputs, each capable of positive-switching semiconductor outputs at 24Vdc and 2A. Power consumption and dissipation are detailed for various operational states, with a maximum power dissipation of 1.9 W. Processing times for output signals and the internal voltage drop are also specified.

About the manufacturer: Pilz is one of the manufacturers that offers I/O Modules that you can order at Quotebeam.com. We are at the forefront of driving the evolution of industrial automation. Our company ethos is built on dedication and principles, placing a high priority on safety. Over the years, we have been devoted to creating cutting-edge products and solutions tailored to our customers' requirements.

Check out the PILZ-328308 Pilz price in the box on the right side or send a quick quote.

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging

PILZ-328308 Description

Pilz PILZ-328308 is an I/O unit designed as a digital output electronic module with specific capabilities for handling inductive, capacitive, and resistive loads. It features potential isolation between semiconductor output and module supply, ensuring functional insulation with a rated surge voltage of 2500V. This unit is suitable for backplane or rackmount mounting modes and operates within an ambient air temperature range of 0 to +55°C. The device, with a net height of 110.8 mm and a design code of 0019h, includes 4 ST output bits plus 4 ST status bits. It supports a rated current of up to 3.5A max, with a detailed output current range and specific residual and transient pulsed output currents. Connection is facilitated via plug-in/detachable cage-clamp terminal connections. As a standard I/O module, it offers an IP20 degree of protection and requires a supply voltage of 16.8-30Vdc, with a nominal 24Vdc. The housing is made from PPE material, and the unit measures 12.5 mm in width and 72.5 mm in depth. It can be stored in temperatures ranging from -40 to +70°C. The module includes 4 digital outputs, each capable of positive-switching semiconductor outputs at 24Vdc and 2A. Power consumption and dissipation are detailed for various operational states, with a maximum power dissipation of 1.9 W. Processing times for output signals and the internal voltage drop are also specified.

1-year warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of Pilz

Shipping and Delivery Worldwide

calculate costs and time

Secure Payment Processing

with money back guarantee

1 year warranty

on all parts

Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Pilz Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Pilz Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Pilz, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

PILZ-751904 Part Image. Manufactured by Pilz.

PILZ-751904

Verified stock: 0

Pilz PILZ-751904 is a safety relay designed as a single-channel contact expansion module with features including instantaneous contact expansion, delayed contact expansion, ON-delay de-energization timer, ON-delay energization timer, safe pulsing timer, and safe separation. It is suitable for DIN rail mounting and has plug-in/detachable spring terminal connections. This part falls under the PNOZ s9 sub-range and has dimensions of W17.5mm with an IP40 degree of protection. The supply voltage requirement is 19.2-28.8Vdc (24Vdc nominal). Constructed with a PC housing, it supports dual-channel operation with a PNOZsigma base unit via PNOZsigma connector or single-channel operation. It features 3 x instantaneous safety outputs (3NO / 3xSPST-NO each made of 2 N.O. contacts in series; 6A 24Vdc DC-1 or 240Vac AC-1 resistive load) and 1 x delayed auxiliary output (1NC / SPST-NC each made of 2 N.C. contacts in series; with a selectable time-delay from 0-300s). Additionally, it includes 1 x digital input (24Vdc; 15mA) and 1 x reset input, with a time delay range of 0-300s (retriggerable).

Pilz

PILZ-751104 Part Image. Manufactured by Pilz.

PILZ-751104

Verified stock: 0

Pilz PILZ-751104 is a safety relay designed for single or dual-channel operation with features including safety gate monitoring, instantaneous E-STOP monitoring, limit switch monitoring, and light beam device monitoring for both type 2 and type 4 devices. It supports ON-delay de-energization timer, delayed E-STOP monitoring, monitored manual reset, start-up testing, and self-test functionalities. This part is suitable for DIN rail mounting and operates within an ambient air temperature range of -10 to +55 °C. It has a net height of 100 mm, a rated current for safety output contacts of 6A at 24Vdc (DC-1), 6A at 240Vac (AC-1), 4A at 24Vdc (DC-13), and 3A at 230Vac (AC-15). Connection is facilitated through plug-in/detachable spring terminal connections. The PILZ-751104, belonging to the PNOZ s5 sub-range, measures 22.5mm in width, has a degree of protection of IP40, and requires a supply voltage of 20.4-26.4Vdc (24Vdc nominal). The housing is made of PC material, with a net width of 22.5 mm, power consumption of 4 W, and a net depth of 120 mm. It features various operating modes including automatic start, manual start, and monitored start with both falling and rising edge detection. The unit can increase the number of contacts available on instantaneous and delayed/instantaneous safety contacts through connectors linking to a PNOZsigma contact expansion module. It has 2 x instantaneous safety outputs and 2 x delayed safety outputs with a selectable time-delay, plus 1 x instantaneous auxiliary output. The protection functions include 2 operating modes with or without detection of shorts across contacts, and it has 2 x digital inputs plus 1 x reset/start input.

Pilz

PILZ-751102 Part Image. Manufactured by Pilz.

PILZ-751102

Verified stock: 0

Pilz PILZ-751102 is a single-channel safety relay designed for safety gate monitoring, instantaneous E-STOP monitoring, and limit switch monitoring. It features DIN rail mounting and operates within an ambient air temperature range of -10 to +55°C. The unit has a net height of 100 mm, with safety output contacts rated at 3A for both 24Vdc (DC-1) and 240Vac (AC-1), and 1.5A for 24Vdc (DC-13) and 230Vac (AC-15). Connection is facilitated through plug-in/detachable spring terminal connections. As part of the PNOZ s1 sub-range, it measures 12.5mm in width, offers an IP40 degree of protection, and requires a supply voltage of 20.4-26.4Vdc (24Vdc nominal). The housing is made of PC material, with a net width of 12.5 mm, a power consumption of 2 W, and a net depth of 120 mm. Its operating mode supports single-channel operation without redundancy in the input circuit, with automatic and manual start options. It allows for the expansion of instantaneous safety contacts by connecting to a PNOZsigma contact expansion module or external contactors/relays. The device includes 2 x instantaneous safety outputs (2NO / 2xSPST-NO each made of 2 N.O. contacts in series; 3A 24Vdc DC-1 or 240Vac AC-1 resistive load) and 1 x instantaneous auxiliary output (semiconductor output; 24Vdc; 20mA), alongside 1 x digital input (24Vdc; 60mA) and 1 x reset/start input.

Pilz

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo