​
Bryan Obida

We are online

Monday - Friday 6AM - 6PM PST

PILZ-311501 Pilz Electrical Safety Devices

Pilz PILZ-311501 Pilz PILZ-311501 is a safety controller designed for security bridge and safety controller functions with potential isolation between SC output and module supply, featuring basic insulation and a rated surge voltage of 2500V. It supports DIN rail mounting (35mmx7.5mm; vertical) and operates within an ambient air temperature range of 0 to +60°C. The device has a net height of 96 mm and incorporates an integrated web server and VPN server to establish a VPN tunnel for PSS 4000 controllers. Connection options include 2 x RJ45 connectors for Ethernet interface, a USB port, and plug-in/detachable screw or spring-loaded terminal connections accommodating 2 points per spring-loaded connection with a 9mm stripping length. With dimensions of W27mm x D111.5mm x H96mm and a net width of 45 mm, it offers an IP20 degree of protection and requires a supply voltage of 16.8-30Vdc (24Vdc nominal). The housing is made from PC material. It utilizes Ethernet as its communication protocol and supports a cross-section range for wiring. Power consumption is rated at 7.5 W. For storage, it can withstand ambient air temperatures from -25 to +70°C. The controller features 1 x digital output (1-pole semiconductor output; 24Vdc; 2A) and 1 x digital input (24Vdc; 10mA; type 3 EN 61131-2), with a transmission rate of 10MBit/s / 100MBit/s over Ethernet.
Pilz

Part#:PILZ-311501

Manufacturer:Pilz

Product Lifecycle:Active

Get a quick Quote!

Pilz PILZ-311501 is a safety controller designed for security bridge and safety controller functions with potential isolation between SC output and module supply, featuring basic insulation and a rated surge voltage of 2500V. It supports DIN rail mounting (35mmx7.5mm; vertical) and operates within an ambient air temperature range of 0 to +60°C. The device has a net height of 96 mm and incorporates an integrated web server and VPN server to establish a VPN tunnel for PSS 4000 controllers. Connection options include 2 x RJ45 connectors for Ethernet interface, a USB port, and plug-in/detachable screw or spring-loaded terminal connections accommodating 2 points per spring-loaded connection with a 9mm stripping length. With dimensions of W27mm x D111.5mm x H96mm and a net width of 45 mm, it offers an IP20 degree of protection and requires a supply voltage of 16.8-30Vdc (24Vdc nominal). The housing is made from PC material. It utilizes Ethernet as its communication protocol and supports a cross-section range for wiring. Power consumption is rated at 7.5 W. For storage, it can withstand ambient air temperatures from -25 to +70°C. The controller features 1 x digital output (1-pole semiconductor output; 24Vdc; 2A) and 1 x digital input (24Vdc; 10mA; type 3 EN 61131-2), with a transmission rate of 10MBit/s / 100MBit/s over Ethernet.

About the manufacturer: Pilz is one of the manufacturers that offers Electrical Safety Devices that you can order at Quotebeam.com. We are at the forefront of driving the evolution of industrial automation. Our company ethos is built on dedication and principles, placing a high priority on safety. Over the years, we have been devoted to creating cutting-edge products and solutions tailored to our customers' requirements.

Check out the PILZ-311501 Pilz price in the box on the right side or send a quick quote.

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging

PILZ-311501 Description

Pilz PILZ-311501 is a safety controller designed for security bridge and safety controller functions with potential isolation between SC output and module supply, featuring basic insulation and a rated surge voltage of 2500V. It supports DIN rail mounting (35mmx7.5mm; vertical) and operates within an ambient air temperature range of 0 to +60°C. The device has a net height of 96 mm and incorporates an integrated web server and VPN server to establish a VPN tunnel for PSS 4000 controllers. Connection options include 2 x RJ45 connectors for Ethernet interface, a USB port, and plug-in/detachable screw or spring-loaded terminal connections accommodating 2 points per spring-loaded connection with a 9mm stripping length. With dimensions of W27mm x D111.5mm x H96mm and a net width of 45 mm, it offers an IP20 degree of protection and requires a supply voltage of 16.8-30Vdc (24Vdc nominal). The housing is made from PC material. It utilizes Ethernet as its communication protocol and supports a cross-section range for wiring. Power consumption is rated at 7.5 W. For storage, it can withstand ambient air temperatures from -25 to +70°C. The controller features 1 x digital output (1-pole semiconductor output; 24Vdc; 2A) and 1 x digital input (24Vdc; 10mA; type 3 EN 61131-2), with a transmission rate of 10MBit/s / 100MBit/s over Ethernet.

1-year warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of Pilz

Shipping and Delivery Worldwide

calculate costs and time

Secure Payment Processing

with money back guarantee

1 year warranty

on all parts

Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Pilz Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Pilz Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Pilz, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

PILZ-787512 Part Image. Manufactured by Pilz.

PILZ-787512

Verified stock: 0

Pilz PILZ-787512 is a safety relay designed for single or dual-channel operation with functions including safety gate monitoring, instantaneous and delayed E-STOP monitoring, limit switch monitoring, and monitored manual reset. It is suitable for DIN rail mounting and operates within an ambient air temperature range of -10 to +55°C. The device has a net height of 101 mm, a rated current for safety output contacts of 8A at 24Vdc (DC-1), 8A at 240Vac (AC-1), 7A at 24Vdc (DC-13), and 5A at 230Vac (AC-15). Connection is facilitated through plug-in/detachable spring terminal connections. As part of the PNOZ XV2P sub-range, it measures 45mm in width, offers a degree of protection of IP40, and requires a supply voltage of 20.4-26.4Vdc (24Vdc nominal). The housing is made of PPO with an ABS front, and it has a net width of 45 mm and a depth of 121 mm. Power consumption is rated at 4.5 W. Operating modes include single-channel operation without redundancy and dual-channel operation with redundancy and detection capabilities for various circuit faults. It features automatic and monitored start options, and the possibility to increase the number of contacts by connecting expansion modules or external contactors/relays. Digital outputs include 2 x instantaneous safety outputs and 2 x delayed safety outputs with a selectable time delay. It also has 2 operating modes, 2 x digital inputs, 1 x start input, and 1 x reset input.

Pilz

PILZ-787435 Part Image. Manufactured by Pilz.

PILZ-787435

Verified stock: 0

Pilz PILZ-787435 is a safety relay designed for single or dual-channel operation with functions including safety gate monitoring, instantaneous and delayed E-STOP monitoring, and limit switch monitoring. It features a monitored manual reset and is suitable for DIN rail mounting. This part operates within an ambient air temperature range of -10 to +55°C and has a net height of 101 mm. The safety output contacts are rated at 8A for both 24Vdc (DC-1) and 240Vac (AC-1), 7A for 24Vdc (DC-13), and 5A for 230Vac (AC-15). Connection is facilitated through plug-in/detachable spring terminal connections. As part of the PNOZ XV2P sub-range, it measures 45mm in width, offers an IP40 degree of protection, and requires a supply voltage of 20.4-26.4Vdc (24Vdc nominal). The housing is made from PPO with an ABS front, and the unit consumes 4.5 W of power. Its depth is 121 mm. The operating modes include detection of earth faults and shorts across contacts, with automatic or monitored start options. It can increase the number of available contacts by connecting to contact expansion modules or external contactors/relays. It provides 2 x instantaneous safety outputs and 2 x delayed safety outputs, with a time-delay selection ranging from 0.1s to 30s. The relay also includes 2 digital inputs, 1 start input, and 1 reset input, supporting both operating modes with or without detection of shorts across contacts.

Pilz

PILZ-787341 Part Image. Manufactured by Pilz.

PILZ-787341

Verified stock: 0

Pilz PILZ-787341 is a safety relay designed for dual-channel operation with two-hand monitoring type III C. It features DIN rail mounting and operates within an ambient air temperature range of -25 to +55°C. The device has a net height of 101 mm, a width of 45 mm, and a depth of 121 mm. It is rated for safety output contacts at 5A for both 24Vdc (DC-1) and 240Vac (AC-1), 1.5A at 24Vdc (DC-13), and 2.5A at 230Vac (AC-15). The connection type is plug-in/detachable spring terminals, and it requires a supply voltage of 35.7-46.2Vac (42Vac / 48Vdc nom.). The PILZ-787341 belongs to the P2HZ X1P sub-range and features a degree of protection IP40 with a PPO housing and ABS front housing. Its power consumption is 6 VA. The operating mode includes dual-channel operation with detection of shorts across contacts, redundant input circuit, detection of earth faults in the start and input circuit, short circuits in the input circuit, and shorts across contacts in the input circuit. It has 3 x instantaneous safety outputs (3NO / 3xSPST-NO each made of 2 N.O. contacts in series; 5A 24Vdc DC-1 or 240Vac AC-1 resistive load) and 1 x instantaneous auxiliary output (1NC / SPST-NC made of 2 N.C. contacts in parallel), plus 2 x instantaneous auxiliary outputs (semiconductor outputs (2SO); 24Vdc; 20mA). The protection functions include detection of shorts across contacts, and it has 2 x digital inputs (24Vdc; 45mA) and 1 x feedback loop input.

Pilz

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo