PILZ-773126

Pilz PILZ-773126 is a configurable safety base unit designed for DIN rail mounting, compatible with a 35mmx7.5mm horizontal rail. It operates within an ambient air temperature range of 0 to +60°C without forced convection and up to +55°C with forced convection off. This safety controller features potential isolation with protective separation, having a rated surge voltage of 2500V between the safety controller output and system voltage, and 6000V between relay output and system voltage. It supports a rated current of 6A for both 24Vdc (DC-1) and 240Vac (AC-1), with specific ratings for different operational modes and a residual current of 0.5mA at a "0" signal. Connection types include plug-in/detachable screw or spring-loaded terminals, accommodating various wire sizes and stripping lengths. The unit's dimensions are 94mm in height, 135mm in width, and 121mm in depth, offering an IP20 degree of protection. It requires a supply voltage of 20.4-28.8Vdc (24Vdc nominal) and is constructed from PPO and ABS materials. The PILZ-773126 supports Ethernet communication, handles a maximum cable length of 1000m per input and 40km overall for test pulse output, and allows for a cross-section range of 0.25 to 2.5mm2 for flexible wiring. Power consumption is rated at 192W with an external power supply under load and 8W with no load. It features 20 safety inputs, 4 safety semiconductor outputs, 2 safety relay outputs, and additional outputs for standard auxiliary and test pulse functions, all designed to ensure short-circuit proof operation and potential isolation. The device's response time varies for different functions, with a maximum cycle time of 15ms and specific delays for switch-off, switch-on, and input processing.

Pilz

PILZ-773123

Verified stock: 0

Pilz PILZ-773123 is a safety controller featuring a configurable safety base unit designed for DIN rail mounting (35mmx7.5mm; horizontal). It operates within an ambient air temperature range of 0 to +60°C without forced convection and up to +55°C with forced convection off. This unit has a net height of 94 mm, is expandable for mechanical press functions, and supports a rated current of 6A at 24Vdc (DC-1) and 240Vac (AC-1), with specific ratings for different operational modes. It offers plug-in/detachable screw or spring-loaded terminal connections, accommodating a wire cross-section of 0.25 to 2.5mm2 depending on the connection type. The base unit is designed with an IP20 degree of protection and requires a supply voltage of 20.4-28.8Vdc. It is constructed with a PPO bottom housing and an ABS front housing, supports a maximum cable length of 1000m per input, and has a net width of 135 mm. Communication is facilitated via an RS-232 protocol. The unit's power consumption varies with operation, including 192 W for external power supply output and 8 W at no load, with an additional 2.5 W per expansion module. It has a net depth of 121 mm and can be stored within an ambient temperature range of -25 to +70°C. The controller features 4 digital safety semiconductor outputs, 1 standard auxiliary semiconductor output, 2 safety relay outputs, 4 test pulse outputs, and 1 standard cascading output, all designed with short-circuit proofing and potential and galvanic isolation. It has a response time of up to 3 seconds for simultaneity between channels 1 and 2, and includes 20 safety inputs. The unit's current consumption is rated at 6A, with various time delays for switch-off, switch-on, supply interruption, input delay, and input pulse duration, alongside a processing time of up to 15 ms for the device's cycle and specific durations for self-test in safety and test pulse outputs.

Pilz

PILZ-773110

Verified stock: 0

Pilz PILZ-773110 is a configurable safety base unit designed for DIN rail mounting, featuring a 35mmx7.5mm horizontal rail. It operates within an ambient air temperature range of 0 to +60°C without forced convection and up to +55°C with forced convection. The unit has a net height of 94mm and is expandable for mechanical press functions. It supports a rated current of 6A at 24Vdc (DC-1) and 240Vac (AC-1), 3A at 24Vdc (DC-13) and 230Vac (AC-15), and a signal level of 2A at "1" with a residual current of 0.5mA at "0" signal. Connection types include plug-in/detachable screw or spring-loaded terminals, accommodating various wire sizes and stripping lengths. The base unit has dimensions of W27mm x L1000mm (max cable length per input) x H135mm x D121mm, with an IP20 degree of protection and a supply voltage range of 20.4-28.8Vdc. It is constructed from PPO bottom housing and ABS front housing, supports Ethernet communication protocol, and allows for a maximum overall cable length of 40km for test pulse output. The power consumption is 192W with an external power supply under load, 9W with no load, and 2.5W per expansion module. It features 20 safety inputs and 9 digital outputs, including 4 safety semiconductor outputs, 1 standard auxiliary semiconductor output, 2 safety relay outputs, 4 test pulse outputs, and 1 standard cascading output, all designed with short-circuit proof, potential isolation, and galvanic isolation protection functions. The response time varies from 0.5s to 3s depending on the function, with a rated impulse voltage of 6kV and a rated insulation voltage of 250V. Current consumption is rated at 6A with specific time delays for switch-off, switch-on, supply interruption, input delay, and input pulse duration, alongside a maximum cycle time of 15ms for device processing.

Pilz

PILZ-773103

Verified stock: 0

Pilz PILZ-773103 is a safety controller featuring a configurable safety base unit designed for DIN rail mounting (35mmx7.5mm; horizontal). It operates within an ambient air temperature range of -25 to +60°C and has a net height of 94 mm. This coated version is expandable and supports a rated current of 6A at 24Vdc (DC-1), 4A at 24Vdc (DC-1 when t>50°C), 6A at 240Vac (AC-1), 4A at 240Vac (AC-1 when t>50°C), 3A at 24Vdc (DC-13; 6 cycles/min), and 3A at 230Vac (AC-15), with a residual current of 0.5mA at "0" signal and 2A at signal level "1" (Ub-0.5Vdc). Connection options include plug-in/detachable screw or spring-loaded terminals, with specific stripping lengths for each connection type. The base unit has dimensions of W27mm, a degree of protection of IP20, and a supply voltage range of 20.4-28.8Vdc (24Vdc nom.). It is constructed with a PPO bottom housing and an ABS front housing, supports a maximum cable length of 1000m per input and 40km overall for test pulse output, and has a net width of 135 mm. Communication is facilitated via RS-232 protocol, and it accommodates various cross-sections for wiring. Power consumption is detailed for output external power supply and per expansion module. The net depth is 121 mm, and it can be stored in temperatures ranging from -25 to +70°C. It features 4 digital outputs for safety semiconductor outputs, 1 for standard auxiliary semiconductor output, 2 for safety relay output, 4 for test pulse outputs, and 1 for standard cascading. Protection functions include short-circuit proofing, potential isolation, and galvanic isolation. Response times, rated impulse voltage, rated insulation voltage, digital inputs specifications, current consumption, time delays, and processing times are precisely defined to ensure operational clarity.

Pilz

This item can ship within 5 days!

773100

$1,974.67

Verified stock: 1

PNOZ m1p base unit

Pilz

773110

Verified stock: 0

PNOZ m0p base unit not expandable

Pilz

773113

Verified stock: 0

PNOZ m0p ETH

Pilz

773123

Verified stock: 0

PNOZ m2p ETH

Pilz

PILZ-773126

Verified stock: 0

Pilz PILZ-773126 is a configurable safety base unit designed for DIN rail mounting, compatible with a 35mmx7.5mm horizontal rail. It operates within an ambient air temperature range of 0 to +60°C without forced convection and up to +55°C with forced convection off. This safety controller features potential isolation with protective separation, having a rated surge voltage of 2500V between the safety controller output and system voltage, and 6000V between relay output and system voltage. It supports a rated current of 6A for both 24Vdc (DC-1) and 240Vac (AC-1), with specific ratings for different operational modes and a residual current of 0.5mA at a "0" signal. Connection types include plug-in/detachable screw or spring-loaded terminals, accommodating various wire sizes and stripping lengths. The unit's dimensions are 94mm in height, 135mm in width, and 121mm in depth, offering an IP20 degree of protection. It requires a supply voltage of 20.4-28.8Vdc (24Vdc nominal) and is constructed from PPO and ABS materials. The PILZ-773126 supports Ethernet communication, handles a maximum cable length of 1000m per input and 40km overall for test pulse output, and allows for a cross-section range of 0.25 to 2.5mm2 for flexible wiring. Power consumption is rated at 192W with an external power supply under load and 8W with no load. It features 20 safety inputs, 4 safety semiconductor outputs, 2 safety relay outputs, and additional outputs for standard auxiliary and test pulse functions, all designed to ensure short-circuit proof operation and potential isolation. The device's response time varies for different functions, with a maximum cycle time of 15ms and specific delays for switch-off, switch-on, and input processing.

Pilz

PILZ-773123

Verified stock: 0

Pilz PILZ-773123 is a safety controller featuring a configurable safety base unit designed for DIN rail mounting (35mmx7.5mm; horizontal). It operates within an ambient air temperature range of 0 to +60°C without forced convection and up to +55°C with forced convection off. This unit has a net height of 94 mm, is expandable for mechanical press functions, and supports a rated current of 6A at 24Vdc (DC-1) and 240Vac (AC-1), with specific ratings for different operational modes. It offers plug-in/detachable screw or spring-loaded terminal connections, accommodating a wire cross-section of 0.25 to 2.5mm2 depending on the connection type. The base unit is designed with an IP20 degree of protection and requires a supply voltage of 20.4-28.8Vdc. It is constructed with a PPO bottom housing and an ABS front housing, supports a maximum cable length of 1000m per input, and has a net width of 135 mm. Communication is facilitated via an RS-232 protocol. The unit's power consumption varies with operation, including 192 W for external power supply output and 8 W at no load, with an additional 2.5 W per expansion module. It has a net depth of 121 mm and can be stored within an ambient temperature range of -25 to +70°C. The controller features 4 digital safety semiconductor outputs, 1 standard auxiliary semiconductor output, 2 safety relay outputs, 4 test pulse outputs, and 1 standard cascading output, all designed with short-circuit proofing and potential and galvanic isolation. It has a response time of up to 3 seconds for simultaneity between channels 1 and 2, and includes 20 safety inputs. The unit's current consumption is rated at 6A, with various time delays for switch-off, switch-on, supply interruption, input delay, and input pulse duration, alongside a processing time of up to 15 ms for the device's cycle and specific durations for self-test in safety and test pulse outputs.

Pilz

PILZ-773110

Verified stock: 0

Pilz PILZ-773110 is a configurable safety base unit designed for DIN rail mounting, featuring a 35mmx7.5mm horizontal rail. It operates within an ambient air temperature range of 0 to +60°C without forced convection and up to +55°C with forced convection. The unit has a net height of 94mm and is expandable for mechanical press functions. It supports a rated current of 6A at 24Vdc (DC-1) and 240Vac (AC-1), 3A at 24Vdc (DC-13) and 230Vac (AC-15), and a signal level of 2A at "1" with a residual current of 0.5mA at "0" signal. Connection types include plug-in/detachable screw or spring-loaded terminals, accommodating various wire sizes and stripping lengths. The base unit has dimensions of W27mm x L1000mm (max cable length per input) x H135mm x D121mm, with an IP20 degree of protection and a supply voltage range of 20.4-28.8Vdc. It is constructed from PPO bottom housing and ABS front housing, supports Ethernet communication protocol, and allows for a maximum overall cable length of 40km for test pulse output. The power consumption is 192W with an external power supply under load, 9W with no load, and 2.5W per expansion module. It features 20 safety inputs and 9 digital outputs, including 4 safety semiconductor outputs, 1 standard auxiliary semiconductor output, 2 safety relay outputs, 4 test pulse outputs, and 1 standard cascading output, all designed with short-circuit proof, potential isolation, and galvanic isolation protection functions. The response time varies from 0.5s to 3s depending on the function, with a rated impulse voltage of 6kV and a rated insulation voltage of 250V. Current consumption is rated at 6A with specific time delays for switch-off, switch-on, supply interruption, input delay, and input pulse duration, alongside a maximum cycle time of 15ms for device processing.

Pilz

PILZ-773103

Verified stock: 0

Pilz PILZ-773103 is a safety controller featuring a configurable safety base unit designed for DIN rail mounting (35mmx7.5mm; horizontal). It operates within an ambient air temperature range of -25 to +60°C and has a net height of 94 mm. This coated version is expandable and supports a rated current of 6A at 24Vdc (DC-1), 4A at 24Vdc (DC-1 when t>50°C), 6A at 240Vac (AC-1), 4A at 240Vac (AC-1 when t>50°C), 3A at 24Vdc (DC-13; 6 cycles/min), and 3A at 230Vac (AC-15), with a residual current of 0.5mA at "0" signal and 2A at signal level "1" (Ub-0.5Vdc). Connection options include plug-in/detachable screw or spring-loaded terminals, with specific stripping lengths for each connection type. The base unit has dimensions of W27mm, a degree of protection of IP20, and a supply voltage range of 20.4-28.8Vdc (24Vdc nom.). It is constructed with a PPO bottom housing and an ABS front housing, supports a maximum cable length of 1000m per input and 40km overall for test pulse output, and has a net width of 135 mm. Communication is facilitated via RS-232 protocol, and it accommodates various cross-sections for wiring. Power consumption is detailed for output external power supply and per expansion module. The net depth is 121 mm, and it can be stored in temperatures ranging from -25 to +70°C. It features 4 digital outputs for safety semiconductor outputs, 1 for standard auxiliary semiconductor output, 2 for safety relay output, 4 for test pulse outputs, and 1 for standard cascading. Protection functions include short-circuit proofing, potential isolation, and galvanic isolation. Response times, rated impulse voltage, rated insulation voltage, digital inputs specifications, current consumption, time delays, and processing times are precisely defined to ensure operational clarity.

Pilz

This item can ship within 5 days!

773100

$1,974.67

Verified stock: 1

PNOZ m1p base unit

Pilz

773110

Verified stock: 0

PNOZ m0p base unit not expandable

Pilz

773113

Verified stock: 0

PNOZ m0p ETH

Pilz

773123

Verified stock: 0

PNOZ m2p ETH

Pilz

PILZ-773126

Verified stock: 0

Pilz PILZ-773126 is a configurable safety base unit designed for DIN rail mounting, compatible with a 35mmx7.5mm horizontal rail. It operates within an ambient air temperature range of 0 to +60°C without forced convection and up to +55°C with forced convection off. This safety controller features potential isolation with protective separation, having a rated surge voltage of 2500V between the safety controller output and system voltage, and 6000V between relay output and system voltage. It supports a rated current of 6A for both 24Vdc (DC-1) and 240Vac (AC-1), with specific ratings for different operational modes and a residual current of 0.5mA at a "0" signal. Connection types include plug-in/detachable screw or spring-loaded terminals, accommodating various wire sizes and stripping lengths. The unit's dimensions are 94mm in height, 135mm in width, and 121mm in depth, offering an IP20 degree of protection. It requires a supply voltage of 20.4-28.8Vdc (24Vdc nominal) and is constructed from PPO and ABS materials. The PILZ-773126 supports Ethernet communication, handles a maximum cable length of 1000m per input and 40km overall for test pulse output, and allows for a cross-section range of 0.25 to 2.5mm2 for flexible wiring. Power consumption is rated at 192W with an external power supply under load and 8W with no load. It features 20 safety inputs, 4 safety semiconductor outputs, 2 safety relay outputs, and additional outputs for standard auxiliary and test pulse functions, all designed to ensure short-circuit proof operation and potential isolation. The device's response time varies for different functions, with a maximum cycle time of 15ms and specific delays for switch-off, switch-on, and input processing.

Pilz

PILZ-773123

Verified stock: 0

Pilz PILZ-773123 is a safety controller featuring a configurable safety base unit designed for DIN rail mounting (35mmx7.5mm; horizontal). It operates within an ambient air temperature range of 0 to +60°C without forced convection and up to +55°C with forced convection off. This unit has a net height of 94 mm, is expandable for mechanical press functions, and supports a rated current of 6A at 24Vdc (DC-1) and 240Vac (AC-1), with specific ratings for different operational modes. It offers plug-in/detachable screw or spring-loaded terminal connections, accommodating a wire cross-section of 0.25 to 2.5mm2 depending on the connection type. The base unit is designed with an IP20 degree of protection and requires a supply voltage of 20.4-28.8Vdc. It is constructed with a PPO bottom housing and an ABS front housing, supports a maximum cable length of 1000m per input, and has a net width of 135 mm. Communication is facilitated via an RS-232 protocol. The unit's power consumption varies with operation, including 192 W for external power supply output and 8 W at no load, with an additional 2.5 W per expansion module. It has a net depth of 121 mm and can be stored within an ambient temperature range of -25 to +70°C. The controller features 4 digital safety semiconductor outputs, 1 standard auxiliary semiconductor output, 2 safety relay outputs, 4 test pulse outputs, and 1 standard cascading output, all designed with short-circuit proofing and potential and galvanic isolation. It has a response time of up to 3 seconds for simultaneity between channels 1 and 2, and includes 20 safety inputs. The unit's current consumption is rated at 6A, with various time delays for switch-off, switch-on, supply interruption, input delay, and input pulse duration, alongside a processing time of up to 15 ms for the device's cycle and specific durations for self-test in safety and test pulse outputs.

Pilz

PILZ-773110

Verified stock: 0

Pilz PILZ-773110 is a configurable safety base unit designed for DIN rail mounting, featuring a 35mmx7.5mm horizontal rail. It operates within an ambient air temperature range of 0 to +60°C without forced convection and up to +55°C with forced convection. The unit has a net height of 94mm and is expandable for mechanical press functions. It supports a rated current of 6A at 24Vdc (DC-1) and 240Vac (AC-1), 3A at 24Vdc (DC-13) and 230Vac (AC-15), and a signal level of 2A at "1" with a residual current of 0.5mA at "0" signal. Connection types include plug-in/detachable screw or spring-loaded terminals, accommodating various wire sizes and stripping lengths. The base unit has dimensions of W27mm x L1000mm (max cable length per input) x H135mm x D121mm, with an IP20 degree of protection and a supply voltage range of 20.4-28.8Vdc. It is constructed from PPO bottom housing and ABS front housing, supports Ethernet communication protocol, and allows for a maximum overall cable length of 40km for test pulse output. The power consumption is 192W with an external power supply under load, 9W with no load, and 2.5W per expansion module. It features 20 safety inputs and 9 digital outputs, including 4 safety semiconductor outputs, 1 standard auxiliary semiconductor output, 2 safety relay outputs, 4 test pulse outputs, and 1 standard cascading output, all designed with short-circuit proof, potential isolation, and galvanic isolation protection functions. The response time varies from 0.5s to 3s depending on the function, with a rated impulse voltage of 6kV and a rated insulation voltage of 250V. Current consumption is rated at 6A with specific time delays for switch-off, switch-on, supply interruption, input delay, and input pulse duration, alongside a maximum cycle time of 15ms for device processing.

Pilz

PILZ-773103

Verified stock: 0

Pilz PILZ-773103 is a safety controller featuring a configurable safety base unit designed for DIN rail mounting (35mmx7.5mm; horizontal). It operates within an ambient air temperature range of -25 to +60°C and has a net height of 94 mm. This coated version is expandable and supports a rated current of 6A at 24Vdc (DC-1), 4A at 24Vdc (DC-1 when t>50°C), 6A at 240Vac (AC-1), 4A at 240Vac (AC-1 when t>50°C), 3A at 24Vdc (DC-13; 6 cycles/min), and 3A at 230Vac (AC-15), with a residual current of 0.5mA at "0" signal and 2A at signal level "1" (Ub-0.5Vdc). Connection options include plug-in/detachable screw or spring-loaded terminals, with specific stripping lengths for each connection type. The base unit has dimensions of W27mm, a degree of protection of IP20, and a supply voltage range of 20.4-28.8Vdc (24Vdc nom.). It is constructed with a PPO bottom housing and an ABS front housing, supports a maximum cable length of 1000m per input and 40km overall for test pulse output, and has a net width of 135 mm. Communication is facilitated via RS-232 protocol, and it accommodates various cross-sections for wiring. Power consumption is detailed for output external power supply and per expansion module. The net depth is 121 mm, and it can be stored in temperatures ranging from -25 to +70°C. It features 4 digital outputs for safety semiconductor outputs, 1 for standard auxiliary semiconductor output, 2 for safety relay output, 4 for test pulse outputs, and 1 for standard cascading. Protection functions include short-circuit proofing, potential isolation, and galvanic isolation. Response times, rated impulse voltage, rated insulation voltage, digital inputs specifications, current consumption, time delays, and processing times are precisely defined to ensure operational clarity.

Pilz

773103 Pilz Industrial Automation Components

Part#:773103

Manufacturer:Pilz

Product condition

$2,356.29

Pilz Disclaimer:

Relevant products

PILZ-773126

PILZ-773123

PILZ-773110

PILZ-773103

773100

773110

773113

773123

PILZ-773126

PILZ-773123

PILZ-773110

PILZ-773103

773100

773110

773113

773123

PILZ-773126

PILZ-773123

PILZ-773110

PILZ-773103

We are a proud member of: