3274162 Phoenix Contact Terminal Blocks

Product Details

• Potentials
  1
• Flammability rating according to UL 94
  V0
• Insulating material group
  I
• Back of the hand protection
  guaranteed
• Result of surge voltage test
  Test passed
• Color
  orange
• Degree of pollution
  3
• Nominal current IN
  24 A
• Finger protection
  guaranteed
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
• Result of temperature-rise test
  Test passed
• Conductor cross section short circuit testing
  4 mm²
• ASD level
  6.12 (m/s2)2/Hz
• Nominal cross section
  2.5 mm²
• Overvoltage category
  III
• Maximum load current
  32 A
• Open side panel
  No
• Connection cross sections directly pluggable
  0.34 mm² 4 mm² 24 12
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• Ambient temperature (actuation)
  -5 °C ... 70 °C
Ambient temperature (assembly)
-5 °C ... 70 °C
ETIM 3.0
EC000897
ETIM 6.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
ECLASS 10.0.1
27141120
ECLASS 5.1
27141120
ECLASS 5.0
27141120
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
Number of connections
18
Height NS 15
31.4 mm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Internal cylindrical gage
A3
ECLASS 11.0
27141120
ECLASS 4.0
27141121
ECLASS 6.0
27141100
ETIM 4.0
EC000897
UNSPSC 11
39121410
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141121
ECLASS 7.0
27141120
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410
Insulating material
PA
Rated surge voltage
8 kV
Nominal voltage UN
690 V
Result of power-frequency withstand voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Maximum power dissipation for nominal condition
0.77 W (the value is based on one connection block and is multiplied according to the pin assignment)
Maximum total current
48 A
Power frequency withstand voltage setpoint
1.89 kV
Bending test turns
135
Tight fit on carrier
NS 35
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Proof of thermal characteristics (needle flame) effective duration
30 s
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test duration per axis
5 h
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Length
28.6 mm
Conductor cross section AWG min.
26
Conductor cross section flexible min.
0.14 mm²
Min. AWG conductor cross section, flexible
26
Number of levels
1
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Oscillation, broadband noise test result
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock test result
Test passed
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Conductor cross section solid min.
0.34 mm²
Conductor cross section AWG max.
12
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Bending test rotation speed
10 rpm
Result of tight fit on support
Test passed
Setpoint
1 N
Short-time current
0.48 kA
Result of aging test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Acceleration
30g
Shock form
Half-sine
Shock duration
18 ms
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Stripping length
8 mm ... 10 mm
Conductor cross section solid max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Result of voltage-drop test
Test passed
Short circuit stability result
Test passed
Result of thermal test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Width
46.9 mm
Connection method
Push-in connection
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible max.
2.5 mm²