3274160 Phoenix Contact Terminal Blocks

Product Details

• Test duration per axis
  5 h
• Number of connections
  18
• Flammability rating according to UL 94
  V0
• Nominal voltage UN
  690 V
• Result of surge voltage test
  Test passed
• Bending test rotation speed
  10 rpm
• Tight fit on carrier
  NS 35
• Result of temperature-rise test
  Test passed
• Result of aging test
  Test passed
• Potentials
  1
• Rated surge voltage
  8 kV
• Overvoltage category
  III
• Nominal current IN
  24 A
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test turns
  135
• Result of voltage-drop test
  Test passed
• Result of thermal test
  Test passed
• Ageing test for screwless modular terminal block temperature cycles
  192
• Number of levels
  1
• Insulating material
  PA
Maximum load current
32 A
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Result of flexion and pull-out test
Test passed
Setpoint
1 N
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Proof of thermal characteristics (needle flame) effective duration
30 s
ASD level
6.12 (m/s2)2/Hz
Acceleration
30g
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Connection in acc. with standard
IEC 60947-7-1
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible min.
0.14 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm² 24 12
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 5.1
27141120
ECLASS 9.0
27141120
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
Nominal cross section
2.5 mm²
Degree of pollution
3
Maximum total current
48 A
Open side panel
No
Result of power-frequency withstand voltage test
Test passed
Tensile test result
Test passed
Conductor cross section short circuit testing
4 mm²
Short-time current
0.48 kA
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Conductor cross section solid min.
0.34 mm²
Connection method
Push-in connection
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Internal cylindrical gage
A3
ECLASS 4.0
27141121
ECLASS 4.1
27141121
ECLASS 7.0
27141120
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Color
violet
Maximum power dissipation for nominal condition
0.77 W (the value is based on one connection block and is multiplied according to the pin assignment)
Insulating material group
I
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Finger protection
guaranteed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Oscillation, broadband noise test result
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Width
46.9 mm
Stripping length
8 mm ... 10 mm
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
ETIM 3.0
EC000897
UNSPSC 11
39121410
UNSPSC 18.0
39121410
UNSPSC 20.0
39121410
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock test result
Test passed
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 15
31.4 mm
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.0
27141120
ETIM 6.0
EC000897
UNSPSC 19.0
39121410
Shock duration
18 ms
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
28.6 mm
Conductor cross section solid max.
4 mm²
Max. AWG conductor cross section, flexible
14
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 6.0
27141100
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)