3274134 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Rated surge voltage
  8 kV
• Maximum load current
  32 A
• Nominal voltage UN
  690 V
• Power frequency withstand voltage setpoint
  1.89 kV
• Bending test rotation speed
  10 rpm
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Shock test result
  Test passed
• Note
  The max. load current must not be exceeded by the total current of all connected conductors.
• Overvoltage category
  III
• Maximum total current
  48 A
• Nominal current IN
  24 A
• Result of power-frequency withstand voltage test
  Test passed
• Bending test turns
  135
• Setpoint
  1 N
• Short circuit stability result
  Test passed
• Ageing test for screwless modular terminal block temperature cycles
  192
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Stripping length
8 mm ... 10 mm
Conductor cross section solid max.
4 mm²
Conductor cross section flexible max.
2.5 mm²
Number of connections
12
Color
white
Insulating material
PA
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of surge voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Result of aging test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Width
31.5 mm
Conductor cross section flexible min.
0.14 mm²
Conductor cross section AWG max.
12
Connection cross sections directly pluggable
0.34 mm² 4 mm² 24 12
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.0
27141121
ECLASS 6.0
27141100
ETIM 3.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Nominal cross section
2.5 mm²
Degree of pollution
3
Maximum power dissipation for nominal condition
0.77 W (the value is based on one connection block and is multiplied according to the pin assignment)
Back of the hand protection
guaranteed
Result of flexion and pull-out test
Test passed
Result of voltage-drop test
Test passed
Short-time current
0.48 kA
Result of thermal test
Test passed
ASD level
6.12 (m/s2)2/Hz
Acceleration
30g
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section AWG min.
26
Connection in acc. with standard
IEC 60947-7-1
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141120
ETIM 4.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
UNSPSC 11
39121410
Potentials
1
Flammability rating according to UL 94
V0
Insulating material group
I
Open side panel
No
Finger protection
guaranteed
Tensile test result
Test passed
Tight fit on carrier
NS 35
Conductor cross section short circuit testing
4 mm²
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Shock form
Half-sine
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 15
31.4 mm
Conductor cross section solid min.
0.34 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Internal cylindrical gage
A3
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection method
Push-in connection
Length
28.6 mm
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 10.0.1
27141120
ECLASS 7.0
27141120
ETIM 6.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.1
27141120
ECLASS 4.1
27141121
ECLASS 9.0
27141120
ETIM 7.0
EC000897