3270455 Phoenix Contact Terminal Blocks

Product Details

• Conductor cross section flexible, with ferrule with plastic sleeve max.
  1.5 mm²
• Insulating material
  PA
• Insulating material group
  I
• Number of connections
  4
• Color of connection elements
  violet
• Color
  gray
• Degree of pollution
  3
• Back of the hand protection
  guaranteed
• Note
  The max. load current must not be exceeded by the total current of all connected conductors.
• Bending test turns
  135
• Result of temperature-rise test
  Test passed
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• ASD level
  0.964 (m/s2)2/Hz
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• UNSPSC 18.0
  39121410
• UNSPSC 19.0
  39121410
• UNSPSC 20.0
  39121410
• Number of positions
  1
• Nominal cross section
  1.5 mm²
• Flammability rating according to UL 94
  V0
Nominal current IN
17.5 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of surge voltage test
Test passed
Power frequency withstand voltage setpoint
1.89 kV
Result of tight fit on support
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Conductor cross section short circuit testing
2.5 mm²
Oscillation, broadband noise test result
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Number of levels
1
Rated surge voltage
6 kV
Nominal voltage UN
500 V
Result of power-frequency withstand voltage test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Tight fit on carrier
NS 35
Short-time current
0.3 kA
Result of thermal test
Test passed
Test spectrum
Service life test category 1, class B, body mounted
Test duration per axis
5 h
Shock test result
Test passed
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
ECLASS 10.0.1
27141120
ECLASS 4.0
27141100
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 5.1
27141100
ECLASS 7.0
27141120
ETIM 6.0
EC000897
UNSPSC 21.0
39121410
Maximum load current
24 A (in case of a 2.5 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
Result of flexion and pull-out test
Test passed
Setpoint
1 N
Short circuit stability result
Test passed
Shock form
Half-sine
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Min. AWG conductor cross section, flexible
26
Conductor cross section solid min.
0.34 mm²
Maximum power dissipation for nominal condition
0.56 W
Tensile test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Width
11 mm
Max. AWG conductor cross section, flexible
14
Internal cylindrical gage
A1
ECLASS 11.0
27141120
ECLASS 6.0
27141100
UNSPSC 13.2
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height
30 mm
Conductor cross section flexible min.
0.14 mm²
Connection cross sections directly pluggable
0.34 mm² 2.5 mm² 20 14
Overvoltage category
III
Finger protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Shock duration
30 ms
ECLASS 4.1
27141100
Connection method
Push-in connection
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section AWG max.
14
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (actuation)
-5 °C ... 70 °C
ETIM 7.0
EC000897
Surface flammability NFPA 130 (ASTM E 162)
passed
ECLASS 5.0
27141100
Open side panel
No
Result of voltage-drop test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Length
8.6 mm
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 9.0
27141120
Stripping length
8 mm ... 10 mm
Conductor cross section AWG min.
26
Bending test rotation speed
10 rpm
Result of aging test
Test passed
Acceleration
5g
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Conductor cross section flexible max.
1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²