3270446 Phoenix Contact Terminal Blocks

Product Details

• Internal cylindrical gage
  A1
• Min. AWG conductor cross section, flexible
  26
• Connection cross sections directly pluggable
  0.34 mm² 2.5 mm² 20 14
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  1.5 mm²
• China RoHS
  Environmentally friendly use period: unlimited = EFUP-e
• UNSPSC 18.0
  39121410
• Conductor cross section flexible min.
  0.14 mm²
• ECLASS 9.0
  27141120
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  1.5 mm²
• ECLASS 10.0.1
  27141120
• ECLASS 4.1
  27141100
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• Permissible humidity (storage/transport)
  30 % ... 70 %
• ECLASS 6.0
  27141100
• ETIM 7.0
  EC000897
• ECLASS 4.0
  27141100
• UNSPSC 20.0
  39121410
• ETIM 6.0
  EC000897
• ECLASS 5.1
  27141100
Nominal cross section
1.5 mm²
Color of connection elements
orange
Rated surge voltage
6 kV
Maximum power dissipation for nominal condition
0.56 W
Result of surge voltage test
Test passed
Result of power-frequency withstand voltage test
Test passed
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Result of temperature-rise test
Test passed
Result of aging test
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
12.2 mm
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Color
gray
Overvoltage category
III
Nominal voltage UN
500 V
Open side panel
No
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test turns
135
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
Short-time current
0.3 kA
Test spectrum
Service life test category 1, class B, body mounted
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section solid min.
0.34 mm²
Number of levels
1
Flammability rating according to UL 94
V0
Setpoint
1 N
Proof of thermal characteristics (needle flame) effective duration
30 s
Ageing test for screwless modular terminal block temperature cycles
192
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section flexible max.
1.5 mm²
Maximum load current
24 A (in case of a 2.5 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 35
Conductor cross section AWG min.
26
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
ECLASS 5.0
27141100
Oscillation, broadband noise test result
Test passed
ASD level
0.964 (m/s2)2/Hz
Shock test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Height
30 mm
Connection in acc. with standard
IEC 60947-7-1
Number of connections
6
Insulating material
PA
Insulating material group
I
Finger protection
guaranteed
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
2.5 mm²
Degree of pollution
3
Nominal current IN
17.5 A
Shock duration
30 ms
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
11 mm
Stripping length
8 mm ... 10 mm
Conductor cross section AWG max.
14
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Acceleration
5g
Test duration per axis
5 h
Number of positions
1
ECLASS 11.0
27141120
ECLASS 7.0
27141120
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Ambient temperature (actuation)
-5 °C ... 70 °C
UNSPSC 19.0
39121410