3270444 Phoenix Contact Terminal Blocks

Product Details

• Conductor cross section AWG min.
  26
• Tensile test result
  Test passed
• ECLASS 7.0
  27141120
• Flammability rating according to UL 94
  V0
• Insulating material group
  I
• Result of surge voltage test
  Test passed
• Note
  The max. load current must not be exceeded by the total current of all connected conductors.
• Ageing test for screwless modular terminal block temperature cycles
  192
• Acceleration
  5g
• Shock duration
  30 ms
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Conductor cross section solid max.
  2.5 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.34 mm²
• Test duration per axis
  5 h
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  1.5 mm²
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• ETIM 7.0
  EC000897
• UNSPSC 19.0
  39121410
• Nominal voltage UN
  500 V
Finger protection
guaranteed
Result of tight fit on support
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of aging test
Test passed
Test spectrum
Service life test category 1, class B, body mounted
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of voltage-drop test
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Height
30 mm
Min. AWG conductor cross section, flexible
26
Max. AWG conductor cross section, flexible
14
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141100
UNSPSC 18.0
39121410
Number of connections
6
Maximum load current
24 A (in case of a 2.5 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
Conductor cross section short circuit testing
2.5 mm²
Shock test result
Test passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Stripping length
8 mm ... 10 mm
Internal cylindrical gage
A1
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.0
27141100
ECLASS 6.0
27141100
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Connection method
Push-in connection
Conductor cross section flexible min.
0.14 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
UNSPSC 13.2
39121410
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.1
27141100
ECLASS 9.0
27141120
UNSPSC 21.0
39121410
UNSPSC 20.0
39121410
Color
gray
Rated surge voltage
6 kV
Overvoltage category
III
Back of the hand protection
guaranteed
Result of flexion and pull-out test
Test passed
Number of positions
1
Insulating material
PA
Open side panel
No
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of temperature-rise test
Test passed
Short-time current
0.3 kA
Tight fit on carrier
NS 35
Proof of thermal characteristics (needle flame) effective duration
30 s
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
ASD level
0.964 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Width
11 mm
Connection in acc. with standard
IEC 60947-7-1
Number of levels
1
Degree of pollution
3
Maximum power dissipation for nominal condition
0.56 W
Nominal current IN
17.5 A
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Conductor cross section AWG max.
14
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
ECLASS 5.0
27141100
Nominal cross section
1.5 mm²
Color of connection elements
black
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Power frequency withstand voltage setpoint
1.89 kV
Bending test rotation speed
10 rpm
Setpoint
1 N
Short circuit stability result
Test passed
Result of thermal test
Test passed
Oscillation, broadband noise test result
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
12.2 mm
Conductor cross section solid min.
0.34 mm²
ECLASS 10.0.1
27141120
Conductor cross section flexible max.
1.5 mm²
Connection cross sections directly pluggable
0.34 mm² 2.5 mm² 20 14
ECLASS 11.0
27141120
ETIM 6.0
EC000897