3270441 Phoenix Contact Terminal Blocks

Product Details

• Maximum load current
  24 A (in case of a 2.5 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
• Result of thermal test
  Test passed
• Color of connection elements
  red
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of power-frequency withstand voltage test
  Test passed
• Bending test turns
  135
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Result of temperature-rise test
  Test passed
• Tight fit on carrier
  NS 35
• Conductor cross section short circuit testing
  2.5 mm²
• Test frequency
  f1 = 5 Hz to f2 = 150 Hz
• Insulating material group
  I
• Open side panel
  No
• Bending test rotation speed
  10 rpm
• Result of voltage-drop test
  Test passed
• Test spectrum
  Service life test category 1, class B, body mounted
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Shock duration
  30 ms
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Height
  30 mm
Connection method
Push-in connection
Min. AWG conductor cross section, flexible
26
Internal cylindrical gage
A1
Maximum power dissipation for nominal condition
0.56 W
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Setpoint
1 N
Short circuit stability result
Test passed
Result of aging test
Test passed
ASD level
0.964 (m/s2)2/Hz
Shock test result
Test passed
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section AWG min.
26
Connection cross sections directly pluggable
0.34 mm² 2.5 mm² 20 14
ECLASS 10.0.1
27141120
UNSPSC 20.0
39121410
UNSPSC 18.0
39121410
Rated surge voltage
6 kV
Nominal current IN
17.5 A
Finger protection
guaranteed
Result of flexion and pull-out test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Acceleration
5g
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
11 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section AWG max.
14
Max. AWG conductor cross section, flexible
14
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 5.1
27141100
ETIM 7.0
EC000897
UNSPSC 19.0
39121410
Result of tight fit on support
Test passed
Short-time current
0.3 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid min.
0.34 mm²
Conductor cross section flexible max.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Degree of pollution
3
Nominal voltage UN
500 V
Result of surge voltage test
Test passed
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 6.0
27141100
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Surface flammability NFPA 130 (ASTM E 162)
passed
Length
12.2 mm
Conductor cross section solid max.
2.5 mm²
Stripping length
8 mm ... 10 mm
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
ECLASS 11.0
27141120
ECLASS 7.0
27141120
ETIM 6.0
EC000897
ECLASS 5.0
27141100
Number of levels
1
Insulating material
PA
Overvoltage category
III
Nominal cross section
1.5 mm²
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Ageing test for screwless modular terminal block temperature cycles
192
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Tensile test result
Test passed
Number of positions
1
Shock form
Half-sine
Ambient temperature (assembly)
-5 °C ... 70 °C
Number of connections
6
Flammability rating according to UL 94
V0
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.0
27141100
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Color
gray
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Conductor cross section flexible min.
0.14 mm²
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
ECLASS 9.0
27141120