3270432 Phoenix Contact Terminal Blocks

Product Details

• Calorimetric heat release NFPA 130 (ASTM E 1354)
  27,5 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• ETIM 6.0
  EC000897
• UNSPSC 19.0
  39121410
• Connection cross sections directly pluggable
  0.34 mm² 2.5 mm² 20 14
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Connection method
  Push-in connection
• China RoHS
  Environmentally friendly use period: unlimited = EFUP-e
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  1.5 mm²
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• UNSPSC 21.0
  39121410
• ETIM 7.0
  EC000897
• Internal cylindrical gage
  A1
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Number of positions
  1
• Color of connection elements
  green
• Overvoltage category
  III
• Nominal voltage UN
  500 V
Result of power-frequency withstand voltage test
Test passed
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Tensile test result
Test passed
Setpoint
1 N
Conductor cross section short circuit testing
2.5 mm²
Result of aging test
Test passed
Test spectrum
Service life test category 1, class B, body mounted
Static insulating material application in cold
-60 °C
Number of levels
1
Insulating material
PA
Nominal current IN
17.5 A
Open side panel
No
Finger protection
guaranteed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Tight fit on carrier
NS 35
Result of temperature-rise test
Test passed
ASD level
0.964 (m/s2)2/Hz
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Bending test rotation speed
10 rpm
Short-time current
0.3 kA
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock test result
Test passed
Height
30 mm
Color
gray
Insulating material group
I
Rated surge voltage
6 kV
Maximum power dissipation for nominal condition
0.56 W
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Oscillation, broadband noise test result
Test passed
Acceleration
5g
Shock duration
30 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
8.6 mm
Conductor cross section solid min.
0.34 mm²
Number of connections
4
Degree of pollution
3
Back of the hand protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test turns
135
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Test duration per axis
5 h
Nominal cross section
1.5 mm²
Flammability rating according to UL 94
V0
Maximum load current
24 A (in case of a 2.5 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Shock form
Half-sine
Number of shocks per direction
3
Power frequency withstand voltage setpoint
1.89 kV
Result of tight fit on support
Test passed
Result of voltage-drop test
Test passed
Result of thermal test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
11 mm
Conductor cross section flexible max.
1.5 mm²
ECLASS 11.0
27141120
UNSPSC 18.0
39121410
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
ECLASS 5.0
27141100
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Stripping length
8 mm ... 10 mm
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 5.1
27141100
Conductor cross section solid max.
2.5 mm²
Min. AWG conductor cross section, flexible
26
Conductor cross section AWG max.
14
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 6.0
27141100
Connection in acc. with standard
IEC 60947-7-1
Max. AWG conductor cross section, flexible
14
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 7.0
27141120
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
ECLASS 10.0.1
27141120
ECLASS 9.0
27141120
Permissible humidity (storage/transport)
30 % ... 70 %
Conductor cross section AWG min.
26
Conductor cross section flexible min.
0.14 mm²