3270426 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  6
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Maximum power dissipation for nominal condition
  0.56 W
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Setpoint
  1 N
• Connection in acc. with standard
  IEC 60947-7-1
• Rated surge voltage
  6 kV
• Overvoltage category
  III
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Bending test rotation speed
  10 rpm
• Power frequency withstand voltage setpoint
  1.89 kV
• Number of positions
  1
• Color of connection elements
  orange
• Result of temperature-rise test
  Test passed
• Result of tight fit on support
  Test passed
• Result of thermal test
  Test passed
• Conductor cross section solid min.
  0.34 mm²
• Conductor cross section AWG min.
  26
• Conductor cross section flexible max.
  1.5 mm²
Internal cylindrical gage
A1
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 11.0
27141120
ECLASS 7.0
27141120
ECLASS 9.0
27141120
ETIM 7.0
EC000897
Result of surge voltage test
Test passed
ECLASS 6.0
27141100
ECLASS 4.0
27141100
UNSPSC 13.2
39121410
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410
Conductor cross section flexible min.
0.14 mm²
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Connection cross sections directly pluggable
0.34 mm² 2.5 mm² 20 14
ECLASS 10.0.1
27141120
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.0
27141100
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 5.1
27141100
ETIM 6.0
EC000897
UNSPSC 20.0
39121410
UNSPSC 19.0
39121410
Conductor cross section AWG max.
14
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Degree of pollution
3
Insulating material
PA
Result of power-frequency withstand voltage test
Test passed
Result of flexion and pull-out test
Test passed
Tight fit on carrier
NS 35
Number of levels
1
Color
gray
Insulating material group
I
Finger protection
guaranteed
Open side panel
No
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Result of voltage-drop test
Test passed
ASD level
0.964 (m/s2)2/Hz
Static insulating material application in cold
-60 °C
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Stripping length
8 mm ... 10 mm
Proof of thermal characteristics (needle flame) effective duration
30 s
Oscillation, broadband noise test result
Test passed
Nominal current IN
17.5 A
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Short-time current
0.3 kA
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Shock test result
Test passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
11 mm
Short circuit stability result
Test passed
Test duration per axis
5 h
Shock duration
30 ms
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Flammability rating according to UL 94
V0
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Length
12.2 mm
Nominal cross section
1.5 mm²
Maximum load current
24 A (in case of a 2.5 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
Nominal voltage UN
500 V
Ageing test for screwless modular terminal block temperature cycles
192
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Height
30 mm
Shock form
Half-sine
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Back of the hand protection
guaranteed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Bending test turns
135
Conductor cross section short circuit testing
2.5 mm²
Test spectrum
Service life test category 1, class B, body mounted
Acceleration
5g
Connection method
Push-in connection
Result of aging test
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C