3270396 Phoenix Contact Terminal Blocks

Product Details

• Overvoltage category
  III
• Tensile test result
  Test passed
• Shock duration
  30 ms
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Result of aging test
  Test passed
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Internal cylindrical gage
  A1
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• ECLASS 5.1
  27141124
• UNSPSC 13.2
  39121410
• UNSPSC 19.0
  39121410
• Number of levels
  1
• Rated surge voltage
  6 kV
• Maximum load current
  24 A (in case of a 2.5 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
Tight fit on carrier
NS 35
Result of temperature-rise test
Test passed
Short-time current
0.3 kA
Oscillation, broadband noise test result
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Insulating material
PA
Nominal current IN
17.5 A
Finger protection
guaranteed
Acceleration
5g
Operating temperature
-60 °C ... 85 °C
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 7.0
27141120
ETIM 7.0
EC000897
UNSPSC 20.0
39121410
Connection cross sections directly pluggable
0.34 mm² 2.5 mm² 20 14
Ambient temperature (storage/transport)
-25 °C ... 55 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 11.0
27141120
ECLASS 6.0
27141100
UNSPSC 18.0
39121410
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
ECLASS 9.0
27141120
ETIM 6.0
EC000897
UNSPSC 21.0
39121410
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Height
30 mm
Conductor cross section solid max.
2.5 mm²
Conductor cross section AWG max.
14
Nominal cross section
1.5 mm²
Insulating material group
I
Open side panel
No
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Result of power-frequency withstand voltage test
Test passed
Result of voltage-drop test
Test passed
ASD level
0.964 (m/s2)2/Hz
Max. AWG conductor cross section, flexible
14
Number of connections
144
Degree of pollution
3
Power frequency withstand voltage setpoint
1.89 kV
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Test duration per axis
5 h
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Width
33 mm
Conductor cross section solid min.
0.34 mm²
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Bending test turns
135
Setpoint
1 N
Flammability rating according to UL 94
V0
Back of the hand protection
guaranteed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Length
102 mm
Stripping length
8 mm ... 10 mm
Color
gray
Conductor cross section flexible max.
1.5 mm²
Number of positions
24
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Ageing test for screwless modular terminal block temperature cycles
192
Shock test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Connection method
Push-in connection
Maximum power dissipation for nominal condition
0.56 W (the value is based on one connection block and is multiplied according to the pin assignment)
Nominal voltage UN
500 V
Conductor cross section AWG min.
26
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Bending test rotation speed
10 rpm
Conductor cross section short circuit testing
2.5 mm²
Result of thermal test
Test passed
Test spectrum
Service life test category 1, class B, body mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Static insulating material application in cold
-60 °C