3270361 Phoenix Contact Terminal Blocks

Product Details

• Result of power-frequency withstand voltage test
  Test passed
• Conductor cross section flexible max.
  1.5 mm²
• Result of thermal test
  Test passed
• Setpoint
  1 N
• Shock test result
  Test passed
• Number of connections
  288
• Degree of pollution
  3
• Nominal current IN
  17.5 A
• ECLASS 10.0.1
  27141120
• ECLASS 4.0
  27141100
• ETIM 7.0
  EC000897
• ECLASS 9.0
  27141120
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• China RoHS
  Environmentally friendly use period: unlimited = EFUP-e
• ECLASS 5.1
  27141100
• UNSPSC 13.2
  39121410
• UNSPSC 19.0
  39121410
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Permissible humidity (storage/transport)
  30 % ... 70 %
ECLASS 11.0
27141120
ECLASS 7.0
27141120
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 6.0
27141100
ECLASS 5.0
27141100
UNSPSC 18.0
39121410
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ETIM 6.0
EC000897
UNSPSC 20.0
39121410
UNSPSC 21.0
39121410
Rated surge voltage
6 kV
Finger protection
guaranteed
Bending test rotation speed
10 rpm
Result of temperature-rise test
Test passed
Result of aging test
Test passed
Conductor cross section short circuit testing
2.5 mm²
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
30 ms
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
111 mm
Conductor cross section AWG min.
26
Nominal cross section
1.5 mm²
Insulating material
PA
Overvoltage category
III
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of surge voltage test
Test passed
Bending test turns
135
Result of flexion and pull-out test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short-time current
0.3 kA
Oscillation, broadband noise test result
Test passed
Acceleration
5g
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Number of shocks per direction
3
Height
30 mm
Connection in acc. with standard
IEC 60947-7-1
Min. AWG conductor cross section, flexible
26
Connection cross sections directly pluggable
0.34 mm² 2.5 mm² 20 14
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Color of connection elements
blue
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Result of tight fit on support
Test passed
Tight fit on carrier
NS 35
Proof of thermal characteristics (needle flame) effective duration
30 s
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test duration per axis
5 h
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Width
66 mm
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section solid min.
0.34 mm²
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Number of levels
1
Flammability rating according to UL 94
V0
Nominal voltage UN
500 V
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Tensile test result
Test passed
Short circuit stability result
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
ASD level
0.964 (m/s2)2/Hz
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Stripping length
8 mm ... 10 mm
Conductor cross section solid max.
2.5 mm²
Max. AWG conductor cross section, flexible
14
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Number of positions
48
Color
gray
Insulating material group
I
Maximum power dissipation for nominal condition
0.56 W
Maximum load current
24 A (in case of a 2.5 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
Open side panel
No
Result of voltage-drop test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Test spectrum
Service life test category 1, class B, body mounted
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section AWG max.
14
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Internal cylindrical gage
A1