3270360 Phoenix Contact Terminal Blocks

Product Details

• Width
  66 mm
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.34 mm²
• Shock form
  Half-sine
• Connection method
  Push-in connection
• ASD level
  0.964 (m/s2)2/Hz
• Static insulating material application in cold
  -60 °C
• Conductor cross section flexible min.
  0.14 mm²
• Permissible humidity (storage/transport)
  30 % ... 70 %
• Conductor cross section AWG max.
  14
• Min. AWG conductor cross section, flexible
  26
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  1.5 mm²
• Rated surge voltage
  6 kV
• Number of positions
  48
• Color of connection elements
  blue
• Nominal cross section
  1.5 mm²
• Color
  gray
• Nominal current IN
  17.5 A
• Result of surge voltage test
  Test passed
• Result of power-frequency withstand voltage test
  Test passed
• Result of voltage-drop test
  Test passed
Short circuit stability result
Test passed
Result of aging test
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Number of shocks per direction
3
Flammability rating according to UL 94
V0
Degree of pollution
3
Nominal voltage UN
500 V
Back of the hand protection
guaranteed
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Acceleration
5g
Shock test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Stripping length
8 mm ... 10 mm
ECLASS 10.0.1
27141120
ECLASS 9.0
27141120
UNSPSC 19.0
39121410
Power frequency withstand voltage setpoint
1.89 kV
Bending test rotation speed
10 rpm
Result of tight fit on support
Test passed
Short-time current
0.3 kA
Test spectrum
Service life test category 1, class B, body mounted
Number of connections
288
Insulating material group
I
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Test duration per axis
5 h
Shock duration
30 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
102 mm
Conductor cross section solid min.
0.34 mm²
Conductor cross section solid max.
2.5 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.0
27141100
ECLASS 6.0
27141100
UNSPSC 13.2
39121410
Number of levels
1
Insulating material
PA
Maximum power dissipation for nominal condition
0.56 W
Overvoltage category
III
Finger protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of temperature-rise test
Test passed
Conductor cross section short circuit testing
2.5 mm²
Oscillation, broadband noise test result
Test passed
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 7.0
27141120
ETIM 7.0
EC000897
Maximum load current
24 A (in case of a 2.5 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
Open side panel
No
Bending test turns
135
Tight fit on carrier
NS 35
Setpoint
1 N
Proof of thermal characteristics (needle flame) effective duration
30 s
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible max.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 5.0
27141100
UNSPSC 18.0
39121410
UNSPSC 20.0
39121410
Conductor cross section AWG min.
26
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Height
30 mm
Max. AWG conductor cross section, flexible
14
Connection cross sections directly pluggable
0.34 mm² 2.5 mm² 20 14
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
ECLASS 5.1
27141100
ETIM 6.0
EC000897
UNSPSC 21.0
39121410
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Internal cylindrical gage
A1
Ambient temperature (actuation)
-5 °C ... 70 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed