3270351 Phoenix Contact Terminal Blocks

Product Details

• Number of positions
  32
• Rated surge voltage
  6 kV
• Color
  gray
• Degree of pollution
  3
• Open side panel
  No
• Finger protection
  guaranteed
• Back of the hand protection
  guaranteed
• Result of voltage-drop test
  Test passed
• Short circuit stability result
  Test passed
• Ageing test for screwless modular terminal block temperature cycles
  192
• Shock test result
  Test passed
• Number of shocks per direction
  3
• Static insulating material application in cold
  -60 °C
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Number of connections
  192
• Insulating material
  PA
• Overvoltage category
  III
• Power frequency withstand voltage setpoint
  1.89 kV
• Bending test rotation speed
  10 rpm
• Tensile test result
  Test passed
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section AWG max.
14
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 10.0.1
27141120
ECLASS 6.0
27141100
ETIM 7.0
EC000897
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Number of levels
1
Color of connection elements
gray/white
Maximum power dissipation for nominal condition
0.56 W
Nominal voltage UN
500 V
Result of power-frequency withstand voltage test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Tight fit on carrier
NS 35
Short-time current
0.3 kA
Conductor cross section short circuit testing
2.5 mm²
ASD level
0.964 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection in acc. with standard
IEC 60947-7-1
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 5.0
27141100
ETIM 6.0
EC000897
UNSPSC 21.0
39121410
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of flexion and pull-out test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of aging test
Test passed
Oscillation, broadband noise test result
Test passed
Acceleration
5g
Shock duration
30 ms
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
111 mm
Conductor cross section AWG min.
26
Min. AWG conductor cross section, flexible
26
Internal cylindrical gage
A1
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 5.1
27141100
Ambient temperature (actuation)
-5 °C ... 70 °C
UNSPSC 19.0
39121410
Nominal cross section
1.5 mm²
Flammability rating according to UL 94
V0
Insulating material group
I
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of thermal test
Test passed
Test spectrum
Service life test category 1, class B, body mounted
Test duration per axis
5 h
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible max.
1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141100
ECLASS 9.0
27141120
UNSPSC 18.0
39121410
Nominal current IN
17.5 A
Result of surge voltage test
Test passed
Bending test turns
135
Setpoint
1 N
Result of tight fit on support
Test passed
Width
44 mm
Conductor cross section solid min.
0.34 mm²
Stripping length
8 mm ... 10 mm
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Connection cross sections directly pluggable
0.34 mm² 2.5 mm² 20 14
ECLASS 11.0
27141120
ECLASS 7.0
27141120
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Maximum load current
24 A (in case of a 2.5 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Height
30 mm
Max. AWG conductor cross section, flexible
14