3270325 Phoenix Contact Terminal Blocks

Product Details

• Number of positions
  80
• Color
  gray
• Insulating material group
  I
• Back of the hand protection
  guaranteed
• Result of flexion and pull-out test
  Test passed
• Number of connections
  480
• Color of connection elements
  gray/white
• Nominal current IN
  17.5 A
• Finger protection
  guaranteed
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
• Result of temperature-rise test
  Test passed
• Short-time current
  0.3 kA
• Test spectrum
  Service life test category 1, class B, body mounted
• Test frequency
  f1 = 5 Hz to f2 = 150 Hz
• Shock form
  Half-sine
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Nominal cross section
  1.5 mm²
• Overvoltage category
  III
• Maximum load current
  24 A (in case of a 2.5 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
Bending test turns
135
Tight fit on carrier
NS 35
Short circuit stability result
Test passed
Result of aging test
Test passed
Test duration per axis
5 h
Shock duration
30 ms
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section AWG max.
14
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 7.0
27141120
UNSPSC 19.0
39121410
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Number of levels
1
Flammability rating according to UL 94
V0
Degree of pollution
3
Maximum power dissipation for nominal condition
0.56 W (the value is based on one connection block and is multiplied according to the pin assignment)
Open side panel
No
Bending test rotation speed
10 rpm
Power frequency withstand voltage setpoint
1.89 kV
Setpoint
1 N
Conductor cross section short circuit testing
2.5 mm²
Ageing test for screwless modular terminal block temperature cycles
192
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section flexible min.
0.14 mm²
Conductor cross section solid min.
0.34 mm²
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Connection cross sections directly pluggable
0.34 mm² 2.5 mm² 20 14
ECLASS 5.1
27141100
ECLASS 5.0
27141100
ETIM 7.0
EC000897
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
110 mm
Stripping length
8 mm ... 10 mm
Conductor cross section flexible max.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 10.0.1
27141120
ECLASS 9.0
27141120
UNSPSC 13.2
39121410
Rated surge voltage
6 kV
Insulating material
PA
Nominal voltage UN
500 V
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of surge voltage test
Test passed
Result of power-frequency withstand voltage test
Test passed
Result of voltage-drop test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
ASD level
0.964 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Number of shocks per direction
3
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.1
27141100
ETIM 6.0
EC000897
UNSPSC 21.0
39121410
Result of tight fit on support
Test passed
Tensile test result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Oscillation, broadband noise test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Acceleration
5g
Surface flammability NFPA 130 (ASTM E 162)
passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Length
111 mm
Connection method
Push-in connection
Conductor cross section AWG min.
26
Min. AWG conductor cross section, flexible
26
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height
30 mm
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Internal cylindrical gage
A1
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 6.0
27141100
UNSPSC 18.0
39121410
UNSPSC 20.0
39121410