3270323 Phoenix Contact Terminal Blocks

Product Details

• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Shock test result
  Test passed
• Tight fit on carrier
  NS 35
• Result of voltage-drop test
  Test passed
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  1.5 mm²
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• Number of levels
  1
• Nominal cross section
  1.5 mm²
• Rated surge voltage
  6 kV
• Maximum power dissipation for nominal condition
  0.56 W (the value is based on one connection block and is multiplied according to the pin assignment)
• Open side panel
  No
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• ECLASS 11.0
  27141120
• ECLASS 7.0
  27141120
• ETIM 7.0
  EC000897
• UNSPSC 13.2
  39121410
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Stripping length
  8 mm ... 10 mm
• Conductor cross section solid max.
  2.5 mm²
• Max. AWG conductor cross section, flexible
  14
Number of connections
192
Insulating material
PA
Degree of pollution
3
Nominal voltage UN
500 V
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Color of connection elements
blue
Insulating material group
I
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Height
30 mm
ECLASS 4.1
27141100
UNSPSC 18.0
39121410
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Bending test rotation speed
10 rpm
Nominal current IN
17.5 A
Result of surge voltage test
Test passed
Finger protection
guaranteed
Result of flexion and pull-out test
Test passed
ECLASS 6.0
27141100
ECLASS 9.0
27141120
UNSPSC 20.0
39121410
Color
gray
Overvoltage category
III
Maximum load current
24 A (in case of a 2.5 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
Shock form
Half-sine
Number of shocks per direction
3
Shock duration
30 ms
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
66 mm
Connection method
Push-in connection
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Test spectrum
Service life test category 1, class B, body mounted
Conductor cross section AWG min.
26
Conductor cross section flexible max.
1.5 mm²
Internal cylindrical gage
A1
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 5.1
27141100
ETIM 6.0
EC000897
UNSPSC 21.0
39121410
ECLASS 5.0
27141100
UNSPSC 19.0
39121410
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 10.0.1
27141120
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Setpoint
1 N
Short-time current
0.3 kA
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section AWG max.
14
Number of positions
48
Result of tight fit on support
Test passed
Conductor cross section short circuit testing
2.5 mm²
Ageing test for screwless modular terminal block temperature cycles
192
Test duration per axis
5 h
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Result of thermal test
Test passed
ASD level
0.964 (m/s2)2/Hz
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Connection cross sections directly pluggable
0.34 mm² 2.5 mm² 20 14
Result of aging test
Test passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Flammability rating according to UL 94
V0
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Conductor cross section solid min.
0.34 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Oscillation, broadband noise test result
Test passed
Acceleration
5g
Power frequency withstand voltage setpoint
1.89 kV
Short circuit stability result
Test passed
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
73.2 mm
Min. AWG conductor cross section, flexible
26
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Test directions
X-, Y- and Z-axis (pos. and neg.)