3270322 Phoenix Contact Terminal Blocks

Product Details

• Number of shocks per direction
  3
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Conductor cross section solid min.
  0.34 mm²
• Test duration per axis
  5 h
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
• Length
  73.2 mm
• Number of levels
  1
• Open side panel
  No
• Result of power-frequency withstand voltage test
  Test passed
• Insulating material
  PA
• Overvoltage category
  III
• Color
  gray
• Maximum power dissipation for nominal condition
  0.56 W (the value is based on one connection block and is multiplied according to the pin assignment)
• Finger protection
  guaranteed
• Power frequency withstand voltage setpoint
  1.89 kV
• Bending test rotation speed
  10 rpm
• Result of tight fit on support
  Test passed
• Setpoint
  1 N
• Result of aging test
  Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Number of positions
48
Nominal cross section
1.5 mm²
Degree of pollution
3
Number of connections
192
Rated surge voltage
6 kV
Nominal current IN
17.5 A
Nominal voltage UN
500 V
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible min.
0.14 mm²
Short-time current
0.3 kA
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Bending test turns
135
Result of temperature-rise test
Test passed
Conductor cross section short circuit testing
2.5 mm²
Result of thermal test
Test passed
ASD level
0.964 (m/s2)2/Hz
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Internal cylindrical gage
A1
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 6.0
27141100
UNSPSC 13.2
39121410
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Flammability rating according to UL 94
V0
Stripping length
8 mm ... 10 mm
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Insulating material group
I
Maximum load current
24 A (in case of a 2.5 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
Result of surge voltage test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Tight fit on carrier
NS 35
Result of voltage-drop test
Test passed
Short circuit stability result
Test passed
Oscillation, broadband noise test result
Test passed
Test spectrum
Service life test category 1, class B, body mounted
Shock duration
30 ms
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
ECLASS 5.0
27141100
ECLASS 4.1
27141100
ECLASS 7.0
27141120
UNSPSC 21.0
39121410
Width
66 mm
ECLASS 4.0
27141100
ECLASS 9.0
27141120
UNSPSC 18.0
39121410
Connection method
Push-in connection
Conductor cross section AWG max.
14
Conductor cross section AWG min.
26
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Connection cross sections directly pluggable
0.34 mm² 2.5 mm² 20 14
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (assembly)
-5 °C ... 70 °C
ETIM 6.0
EC000897
Color of connection elements
gray/white
Back of the hand protection
guaranteed
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Acceleration
5g
Min. AWG conductor cross section, flexible
26
UNSPSC 20.0
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Conductor cross section flexible max.
1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
ECLASS 5.1
27141100
ETIM 7.0
EC000897
UNSPSC 19.0
39121410
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Height
30 mm