3270320 Phoenix Contact Terminal Blocks

Product Details

• Degree of pollution
  3
• Finger protection
  guaranteed
• Bending test turns
  135
• Conductor cross section flexible max.
  1.5 mm²
• Note
  The max. load current must not be exceeded by the total current of all connected conductors.
• Insulating material
  PA
• Setpoint
  1 N
• Conductor cross section short circuit testing
  2.5 mm²
• Result of aging test
  Test passed
• ASD level
  0.964 (m/s2)2/Hz
• Shock duration
  30 ms
• Static insulating material application in cold
  -60 °C
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Height
  30 mm
• Width
  66 mm
• Conductor cross section AWG min.
  26
• Oscillation, broadband noise test result
  Test passed
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Test duration per axis
  5 h
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Length
102 mm
Connection method
Push-in connection
Conductor cross section solid min.
0.34 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Internal cylindrical gage
A1
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.0
27141100
ECLASS 5.0
27141100
Number of levels
1
Color
gray
Maximum power dissipation for nominal condition
0.56 W (the value is based on one connection block and is multiplied according to the pin assignment)
Nominal voltage UN
500 V
Result of surge voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tight fit on carrier
NS 35
Result of voltage-drop test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Maximum load current
24 A (in case of a 2.5 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
Open side panel
No
Power frequency withstand voltage setpoint
1.89 kV
Result of flexion and pull-out test
Test passed
Result of tight fit on support
Test passed
Short-time current
0.3 kA
Proof of thermal characteristics (needle flame) effective duration
30 s
Acceleration
5g
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Stripping length
8 mm ... 10 mm
Conductor cross section solid max.
2.5 mm²
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Connection cross sections directly pluggable
0.34 mm² 2.5 mm² 20 14
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 5.1
27141100
ECLASS 6.0
27141100
UNSPSC 19.0
39121410
UNSPSC 18.0
39121410
Number of positions
48
Nominal cross section
1.5 mm²
Rated surge voltage
6 kV
Bending test rotation speed
10 rpm
Tensile test result
Test passed
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test spectrum
Service life test category 1, class B, body mounted
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Number of connections
288
Flammability rating according to UL 94
V0
Insulating material group
I
Nominal current IN
17.5 A
Result of power-frequency withstand voltage test
Test passed
Color of connection elements
blue
Overvoltage category
III
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection
guaranteed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short circuit stability result
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Shock form
Half-sine
Shock test result
Test passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section AWG max.
14
Conductor cross section flexible min.
0.14 mm²
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.1
27141100
ECLASS 9.0
27141120
UNSPSC 13.2
39121410
ETIM 7.0
EC000897
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 7.0
27141120
ETIM 6.0
EC000897
UNSPSC 21.0
39121410
UNSPSC 20.0
39121410