3270246 Phoenix Contact Terminal Blocks

Product Details

• Conductor cross section flexible, with ferrule without plastic sleeve max.
  1.5 mm²
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• Power frequency withstand voltage setpoint
  1.5 kV
• Number of connections
  16
• Flammability rating according to UL 94
  V0
• Nominal current IN
  17.5 A
• Maximum load current
  20 A (in case of a 2.5 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
• Finger protection
  guaranteed
• Color of connection elements
  red
• Rated surge voltage
  4 kV
• Overvoltage category
  III
• Nominal voltage UN
  250 V
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Number of levels
  4
• Oscillation, broadband noise test result
  Test passed
• Acceleration
  30g
• Shock test result
  Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Potentials
1
Color
gray
Maximum power dissipation for nominal condition
0.56 W (the value is multiplied when connecting multiple levels)
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Conductor cross section short circuit testing
2.5 mm²
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Width
8.3 mm
Height NS 35/15
63 mm
Conductor cross section AWG max.
14
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.1
27141100
UNSPSC 13.2
39121410
Number of positions
2
Nominal cross section
1.5 mm²
Insulating material
PA
Insulating material group
I
Open side panel
Yes
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Setpoint
1 N
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Bending test rotation speed
10 rpm
Bending test turns
135
Result of voltage-drop test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Ageing test for screwless modular terminal block temperature cycles
192
Test frequency
f1 = 5 Hz to f2 = 250 Hz
ASD level
6.12 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Stripping length
8 mm ... 10 mm
Tensile test result
Test passed
Tight fit on carrier
NS 35
Short circuit stability result
Test passed
Short-time current
0.3 kA
Result of aging test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Shock duration
18 ms
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Height NS 35/7,5
55.5 mm
Connection method
Push-in connection
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section AWG min.
26
ECLASS 6.0
27141100
ETIM 7.0
EC000897
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ETIM 4.0
EC000897
UNSPSC 18.0
39121410
Connection
1st, 2nd, 3rd and 4th level
Conductor cross section flexible min.
0.14 mm²
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
ETIM 6.0
EC000897
UNSPSC 19.0
39121410
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible max.
1.5 mm²
Connection cross sections directly pluggable
0.34 mm² 2.5 mm² 20 14
ECLASS 10.0.1
27141120
ECLASS 11.0
27141120
UNSPSC 21.0
39121410
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 9.0
27141120
UNSPSC 20.0
39121410
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 7.0
27141120
Conductor cross section solid max.
2.5 mm²
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
64 mm
Conductor cross section solid min.
0.34 mm²