3270224 Phoenix Contact Terminal Blocks

Product Details

• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of flexion and pull-out test
  Test passed
• Number of connections
  29
• Nominal cross section feed-in
  4 mm²
• Tight fit on carrier
  NS 35
• Maximum load current
  37 A (Service Entrance)
• Overvoltage category
  III
• Open side panel
  Yes
• Result of temperature-rise test
  Test passed
• Short circuit stability result
  Test passed
• Ageing test for screwless modular terminal block temperature cycles
  192
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Height NS 35/15
  95 mm
• Conductor cross section AWG max.
  10
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• Potentials
  1
• Insulating material
  PA
Insulating material group
I
Nominal current IN
32 A (Supply, for 4 mm² conductor cross section)
Finger protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Conductor cross section short circuit testing
6 mm²
Short-time current
0.72 kA
Oscillation, broadband noise test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Width
8.3 mm
Connection method
Push-in connection
Connection
Feed-in stage
ECLASS 7.0
27141120
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Flammability rating according to UL 94
V0
Color of connection elements
red
Maximum power dissipation for nominal condition
0.56 W (the value is multiplied when connecting multiple levels)
Nominal voltage UN
250 V
Result of power-frequency withstand voltage test
Test passed
Power frequency withstand voltage setpoint
1.5 kV
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of voltage-drop test
Test passed
Result of aging test
Test passed
ASD level
6.12 (m/s2)2/Hz
Test spectrum
Service life test category 2, bogie-mounted
Number of levels
8
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Height NS 35/7,5
87.5 mm
Stripping length
10 mm ... 12 mm
Conductor cross section AWG min.
24
Rated surge voltage
4 kV
Maximum total current
37 A (per potential distributor)
Back of the hand protection
guaranteed
Bending test rotation speed
10 rpm
Bending test turns
135
Setpoint
1 N
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Acceleration
30g
Max. AWG conductor cross section, flexible
10
ECLASS 4.0
27141100
ETIM 4.0
EC000901
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Number of positions
2
Nominal cross section
1.5 mm²
Color
gray
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
100 mm
Conductor cross section solid min.
0.34 mm²
Result of surge voltage test
Test passed
Tensile test result
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.2 mm²
Note
Only the “CRIMPFOX 6” crimping pliers may be used for crimping with 6 mm² stranded and ferrule.
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 5.1
27141100
ECLASS 9.0
27141120
UNSPSC 12.01
39121410
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test duration per axis
5 h
Shock test result
Test passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section solid max.
6 mm²
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.2 mm²
Value
0.34 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.1
27141100
ECLASS 11.0
27141120
ECLASS 6.0
27141100
ETIM 7.0
EC000897
UNSPSC 19.0
39121410
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141100
ETIM 3.0
EC000901
ETIM 6.0
EC000897
UNSPSC 13.2
39121410
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Connection cross sections directly pluggable
0.34 mm² 6 mm² 24 10