3270222 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  4
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ECLASS 5.1
  27141100
• Result of tight fit on support
  Test passed
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Test duration per axis
  5 h
• Number of shocks per direction
  3
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Width
  8.3 mm
• Number of positions
  2
• Flammability rating according to UL 94
  V0
• Open side panel
  Yes
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Connection
  1st, 2nd, 3rd and 4th level
• Conductor cross section flexible min.
  0.14 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  1.5 mm²
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• ECLASS 10.0.1
  27141120
• Permissible humidity (storage/transport)
  30 % ... 70 %
Number of connections
16
Nominal cross section
1.5 mm²
Maximum load current
24 A (per chamber with 2.5 mm² conductor cross section)
Back of the hand protection
guaranteed
Result of flexion and pull-out test
Test passed
Tight fit on carrier
NS 35
Result of thermal test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/15
63 mm
Conductor cross section solid min.
0.34 mm²
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Color
gray
Rated surge voltage
4 kV
Nominal current IN
17.5 A (with 1.5 mm² conductor cross section)
Power frequency withstand voltage setpoint
1.5 kV
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Short circuit stability result
Test passed
Short-time current
0.3 kA
Ageing test for screwless modular terminal block temperature cycles
192
Acceleration
30g
Proof of thermal characteristics (needle flame) effective duration
30 s
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Result of temperature-rise test
Test passed
Result of aging test
Test passed
Setpoint
1 N
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
2.5 mm²
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Length
64 mm
Potentials
1
Maximum power dissipation for nominal condition
0.56 W (the value is multiplied when connecting multiple levels)
Finger protection
guaranteed
Result of surge voltage test
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Insulating material
PA
Tensile test result
Test passed
Static insulating material application in cold
-60 °C
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
ECLASS 4.1
27141100
ECLASS 7.0
27141120
UNSPSC 12.01
39121410
ETIM 7.0
EC000897
UNSPSC 19.0
39121410
Overvoltage category
III
Bending test rotation speed
10 rpm
Height NS 35/7,5
55.5 mm
Stripping length
8 mm ... 10 mm
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 6.0
27141100
UNSPSC 11
39121410
Maximum total current
37 A (per potential distributor)
Result of power-frequency withstand voltage test
Test passed
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 9.0
27141120
ECLASS 5.0
27141100
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
UNSPSC 20.0
39121410
Color of connection elements
red
Insulating material group
I
Nominal voltage UN
250 V
Conductor cross section AWG max.
14
Max. AWG conductor cross section, flexible
14
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Bending test turns
135
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection method
Push-in connection
ECLASS 4.0
27141100
ETIM 6.0
EC000897
UNSPSC 13.2
39121410
Conductor cross section flexible max.
1.5 mm²
Connection cross sections directly pluggable
0.34 mm² 2.5 mm² 20 14
Conductor cross section AWG min.
26
ETIM 3.0
EC000897
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410