3270197 Phoenix Contact Terminal Blocks

Product Details

• Note
  The current is determined by the fuse used, the voltage by the selected LED.If the fuse is faulty, the downstream circuit will not be disconnected.
• Number of levels
  1
• Number of connections
  2
• Nominal cross section
  4 mm²
• Color
  black
• Insulating material
  PA
• Flammability rating according to UL 94
  V0
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Height
  35.3 mm
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• Conductor cross section solid max.
  6 mm²
• Conductor cross section flexible min.
  0.2 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.25 mm²
• Maximum power dissipation for nominal condition
  1.6 W
• Degree of pollution
  3
• Insulating material group
  I
• LED voltage range
  110 V AC/DC ... 250 V AC/DC
• Nominal current IN
  6.3 A
• Connection in acc. with standard
  IEC 60947-7-3
Fuse
G / 5 x 20
Open side panel
Yes
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Length
67.8 mm
Height NS 35/15
50.3 mm
Rated surge voltage
4 kV
Maximum power dissipation
max. 1.6 W (with single arrangement of the fuse terminal block in the event of overload)
Overvoltage category
III
LED current range
0.41 mA ... 0.96 mA
Maximum load current
6.3 A (the current is determined by the fuse used)
Nominal voltage UN
250 V
Fuse type
Glass / ceramics / ...
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Static insulating material application in cold
-60 °C
Width
8.2 mm
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
End cover width
2.2 mm
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Stripping length
10 mm ... 12 mm
ECLASS 10.0.1
27141116
ECLASS 7.0
27141116
ECLASS 9.0
27141116
ETIM 7.0
EC000899
UNSPSC 18.0
39121410
Conductor cross section AWG max.
10
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
ECLASS 4.0
27141100
ECLASS 6.0
27141100
ETIM 4.0
EC000899
UNSPSC 13.2
39121410
Ambient temperature (assembly)
-5 °C ... 70 °C
Conductor cross section AWG min.
24
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Connection method
Push-in connection
ECLASS 11.0
27141116
ECLASS 5.1
27141100
ETIM 3.0
EC000899
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
UNSPSC 20.0
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/7,5
42.8 mm
Permissible humidity (storage/transport)
30 % ... 70 %
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Internal cylindrical gage
A4
ECLASS 4.1
27141100
ETIM 6.0
EC000899
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141100
ETIM 2.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 11
39121410