3270181 Phoenix Contact Terminal Blocks

Product Details

• ECLASS 4.1
  27141100
• Flammability rating according to UL 94
  V0
• Short-time current
  0.3 kA
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  27,5 MJ/kg
• Height NS 35/7,5
  55.5 mm
• Height NS 35/15
  63 mm
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.34 mm²
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
• Oscillation, broadband noise test result
  Test passed
• ASD level
  6.12 (m/s2)2/Hz
• Shock form
  Half-sine
• Length
  64 mm
• Test spectrum
  Service life test category 2, bogie-mounted
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Conductor cross section solid max.
  2.5 mm²
• Conductor cross section flexible max.
  1.5 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.34 mm²
• Permissible humidity (storage/transport)
  30 % ... 70 %
ECLASS 4.0
27141100
Open side panel
Yes
Tensile test result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Number of shocks per direction
3
Max. AWG conductor cross section, flexible
14
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ECLASS 7.0
27141120
ETIM 6.0
EC000897
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.1
27141100
UNSPSC 19.0
39121410
Connection method
Push-in connection
Conductor cross section flexible min.
0.14 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ETIM 4.0
EC000897
UNSPSC 20.0
39121410
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
UNSPSC 6.01
30211811
ETIM 3.0
EC000897
UNSPSC 21.0
39121410
Bending test turns
135
Result of voltage-drop test
Test passed
Setpoint
1 N
Result of thermal test
Test passed
Shock duration
18 ms
Rated surge voltage
4 kV
Nominal voltage UN
250 V
Result of surge voltage test
Test passed
Insulating material group
I
Tight fit on carrier
NS 35
Result of temperature-rise test
Test passed
Short circuit stability result
Test passed
Result of aging test
Test passed
Test duration per axis
5 h
Shock test result
Test passed
Nominal current IN
17.5 A
Result of power-frequency withstand voltage test
Test passed
Back of the hand protection
guaranteed
Insulating material
PA
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Power frequency withstand voltage setpoint
1.5 kV
Result of flexion and pull-out test
Test passed
Result of tight fit on support
Test passed
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Conductor cross section short circuit testing
2.5 mm²
Acceleration
30g
Number of positions
2
Color
blue
Finger protection
guaranteed
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Potentials
1
Bending test rotation speed
10 rpm
Proof of thermal characteristics (needle flame) effective duration
30 s
Width
8.3 mm
Number of connections
16
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Stripping length
8 mm ... 10 mm
Min. AWG conductor cross section, flexible
26
Nominal cross section
1.5 mm²
Overvoltage category
III
Maximum load current
20 A (in case of a 2.5 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section AWG min.
26
Number of levels
4
Color of connection elements
black
Maximum power dissipation for nominal condition
0.56 W (the value is multiplied when connecting multiple levels)
Ageing test for screwless modular terminal block temperature cycles
192
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Connection
1st, 2nd, 3rd and 4th level
Conductor cross section solid min.
0.34 mm²
Conductor cross section AWG max.
14
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Connection cross sections directly pluggable
0.34 mm² 2.5 mm² 20 14
ECLASS 11.0
27141120
ECLASS 10.0.1
27141120
ECLASS 6.0
27141100
ECLASS 9.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 12.01
39121410
UNSPSC 11
39121410
UNSPSC 18.0
39121410