3270125 Phoenix Contact Terminal Blocks

Product Details

• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Number of connections
  16
• Color of connection elements
  black
• Overvoltage category
  III
• Open side panel
  Yes
• Result of flexion and pull-out test
  Test passed
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Ageing test for screwless modular terminal block temperature cycles
  192
• ASD level
  6.12 (m/s2)2/Hz
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  27,5 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Number of levels
  4
• Insulating material
  PA
• China RoHS
  Environmentally friendly use period: unlimited = EFUP-e
• Maximum load current
  20 A (in case of a 2.5 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
Height NS 35/7,5
55.5 mm
Connection
1st, 2nd, 3rd and 4th level
Conductor cross section AWG min.
26
Max. AWG conductor cross section, flexible
14
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.1
27141100
ETIM 6.0
EC000897
UNSPSC 20.0
39121410
Power frequency withstand voltage setpoint
1.5 kV
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Result of voltage-drop test
Test passed
Shock test result
Test passed
Result of surge voltage test
Test passed
Bending test turns
135
Setpoint
1 N
Short-time current
0.3 kA
Result of aging test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Width
8.3 mm
Length
64 mm
Conductor cross section solid min.
0.34 mm²
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
ECLASS 11.0
27141120
ECLASS 9.0
27141120
UNSPSC 13.2
39121410
Nominal cross section
1.5 mm²
Nominal voltage UN
250 V
Nominal current IN
17.5 A
Shock duration
18 ms
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Number of positions
2
Color
gray
Rated surge voltage
4 kV
Maximum power dissipation for nominal condition
0.56 W (the value is multiplied when connecting multiple levels)
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Result of thermal test
Test passed
Height NS 35/15
63 mm
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible max.
1.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.0
27141100
ECLASS 7.0
27141120
ETIM 7.0
EC000897
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Acceleration
30g
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Potentials
1
Result of temperature-rise test
Test passed
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Static insulating material application in cold
-60 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Connection cross sections directly pluggable
0.34 mm² 2.5 mm² 20 14
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141120
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410
Flammability rating according to UL 94
V0
Insulating material group
I
Finger protection
guaranteed
Back of the hand protection
guaranteed
Tensile test result
Test passed
Tight fit on carrier
NS 35
Conductor cross section AWG max.
14
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
ECLASS 6.0
27141100
ETIM 4.0
EC000897
UNSPSC 19.0
39121410
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Stripping length
8 mm ... 10 mm
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Connection method
Push-in connection
Conductor cross section short circuit testing
2.5 mm²
Test spectrum
Service life test category 2, bogie-mounted