3270106 Phoenix Contact Terminal Blocks

Product Details

• Max. AWG conductor cross section, flexible
  14
• Nominal cross section
  2.5 mm²
• Insulating material
  PA
• Overvoltage category
  III
• Back of the hand protection
  guaranteed
• Power frequency withstand voltage setpoint
  1.89 kV
• Result of flexion and pull-out test
  Test passed
• Setpoint
  1 N
• Result of temperature-rise test
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test spectrum
  Service life test category 2, bogie-mounted
• Shock test result
  Test passed
• Number of shocks per direction
  3
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Length
  56 mm
• Height NS 35/15
  44 mm
• Connection method
  Push-in connection
• Conductor cross section solid max.
  4 mm²
• Min. AWG conductor cross section, flexible
  26
Number of levels
1
Area of application
Railway industry
Insulating material group
I
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Tensile test result
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short-time current
0.48 kA
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Shock duration
18 ms
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height
35.3 mm
Conductor cross section solid min.
0.34 mm²
Conductor cross section flexible max.
2.5 mm²
Potentials
1
Degree of pollution
3
Maximum load current
28 A (with 4 mm² conductor cross section)
Nominal voltage UN
400 V
Finger protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Tight fit on carrier
NS 35
Short circuit stability result
Test passed
Result of thermal test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
5.2 mm
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Stripping length
8 mm ... 10 mm
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 5.1
27141100
ETIM 2.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
Color
gray
Nominal current IN
24 A
Open side panel
Yes
Bending test turns
135
Result of voltage-drop test
Test passed
Result of aging test
Test passed
Acceleration
30g
Test duration per axis
5 h
Surface flammability NFPA 130 (ASTM E 162)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Connection
1 level
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141100
ECLASS 6.0
27141100
ECLASS 9.0
27141120
UNSPSC 11
39121410
UNSPSC 18.0
39121410
Number of connections
2
Flammability rating according to UL 94
V0
Rated surge voltage
6 kV
Maximum power dissipation for nominal condition
0.77 W
Result of surge voltage test
Test passed
Result of tight fit on support
Test passed
Conductor cross section short circuit testing
4 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
End cover width
2.2 mm
Height NS 35/7,5
36.5 mm
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
ECLASS 4.1
27141100
ETIM 4.0
EC000897
ETIM 6.0
EC000897
Internal cylindrical gage
A3
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 7.0
27141120
ETIM 7.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 4.0
27141100
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410