3248152 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  2
• Result of power-frequency withstand voltage test
  Test passed
• Bending test rotation speed
  10 rpm
• Tight fit on carrier
  NS 15
• Short circuit stability result
  Test passed
• Result of aging test
  Test passed
• Acceleration
  30g
• Shock test result
  Test passed
• Shock duration
  18 ms
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Conductor cross section solid min.
  0.34 mm²
• Conductor cross section AWG max.
  16
• Max. AWG conductor cross section, flexible
  16
• Connection cross sections directly pluggable
  0.34 mm² 1.5 mm² 24 16
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• ECLASS 4.0
  27141100
• ECLASS 10.0.1
  27141120
• Color
  blue
• Rated surge voltage
  6 kV
Overvoltage category
III
Maximum load current
17.5 A
Back of the hand protection
guaranteed
Bending test turns
135
Setpoint
1 N
Conductor cross section short circuit testing
1.5 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Height NS 15
27.2 mm
Stripping length
8 mm ... 10 mm
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Nominal cross section
1.5 mm²
Number of levels
1
Degree of pollution
3
Nominal current IN
17.5 A
Maximum power dissipation for nominal condition
0.56 W
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Nominal voltage UN
500 V
Result of surge voltage test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Tensile test result
Test passed
Short-time current
0.18 kA
Ageing test for screwless modular terminal block temperature cycles
192
Oscillation, broadband noise test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection in acc. with standard
IEC 60947-7-1/IEC 60947-7-2
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 11.0
27141120
ECLASS 6.0
27141100
ETIM 2.0
EC000897
ETIM 3.0
EC000897
UNSPSC 19.0
39121410
UNSPSC 20.0
39121410
Potentials
1
Flammability rating according to UL 94
V0
Insulating material
PA
Insulating material group
I
Open side panel
No
Finger protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Result of voltage-drop test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test spectrum
Service life test category 2, bogie-mounted
ASD level
6.12 (m/s2)2/Hz
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Width
4.2 mm
Length
21 mm
Conductor cross section solid max.
1.5 mm²
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
Power frequency withstand voltage setpoint
1.89 kV
Result of flexion and pull-out test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
Test duration per axis
5 h
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible max.
1.5 mm²
Internal cylindrical gage
A1 / B1
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 7.0
27141120
ETIM 6.0
EC000897
UNSPSC 11
39121410
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141100
ECLASS 5.1
27141100
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
ECLASS 9.0
27141120
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
UNSPSC 18.0
39121410