3248130 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section
  2.5 mm²
• Insulating material
  PA
• Area of application
  Railway industry
• Color
  green-yellow
• Insulating material group
  I
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Shock form
  Half-sine
• Number of connections
  2
• Flammability rating according to UL 94
  V0
• Back of the hand protection
  guaranteed
• Acceleration
  30g
• Number of shocks per direction
  3
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Length
  36 mm
• Connection
  1 level
• Conductor cross section AWG max.
  12
• Min. AWG conductor cross section, flexible
  26
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  2.5 mm²
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141100
ETIM 6.0
EC000901
UNSPSC 7.0901
39121410
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Oscillation, broadband noise test result
Test passed
End cover width
2.2 mm
Conductor cross section solid max.
4 mm²
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.1
27141100
ECLASS 6.0
27141100
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
Degree of pollution
3
Overvoltage category
III
ASD level
6.12 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Width
5.2 mm
Note
Please observe the current carrying capacity of the DIN rails.
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Stripping length
8 mm ... 10 mm
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Conductor cross section flexible min.
0.14 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Connection cross sections directly pluggable
0.34 mm² 4 mm²
ECLASS 10.0.1
27141141
ETIM 4.0
EC000901
ECLASS 7.0
27141141
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Test duration per axis
5 h
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height
32.1 mm
Conductor cross section solid min.
0.34 mm²
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 9.0
27141141
Open side panel
Yes
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test spectrum
Service life test category 2, bogie-mounted
UNSPSC 12.01
39121410
UNSPSC 11
39121410
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.1
27141100
ECLASS 11.0
27141141
ETIM 7.0
EC000901
ETIM 3.0
EC001329
UNSPSC 18.0
39121410
UNSPSC 20.0
39121410
Number of levels
1
Rated surge voltage
6 kV
Finger protection
guaranteed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Connection method
Push-in connection
Height NS 15
34.8 mm
Connection in acc. with standard
CUL
Internal cylindrical gage
A3