3248037 Phoenix Contact Terminal Blocks

3248037 Product Details

• Flammability rating according to UL 94
  V0
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.25 mm²
• Conductor cross section flexible min.
  0.2 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  4 mm²
• Internal cylindrical gage
  A4
• Shock duration
  30 ms
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Connection in acc. with standard
  CSA
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• Test spectrum
  Service life test category 2, bogie-mounted
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Connection method
  Screw connection
• Conductor cross section AWG min.
  24
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.25 mm²
• Length
  29.9 mm
• Number of levels
  1
• Nominal cross section
  4 mm²
Rated surge voltage
6 kV
Overvoltage category
III
ECLASS 10.0.1
27141141
ECLASS 6.0
27141100
ETIM 7.0
EC000901
UNSPSC 20.0
39121410
Ambient temperature (actuation)
-5 °C ... 70 °C
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.1
27141100
ECLASS 7.0
27141141
ETIM 6.0
EC000901
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 5.0
27141100
ECLASS 9.0
27141141
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 5.1
27141100
ETIM 3.0
EC000897
UNSPSC 13.2
39121410
ECLASS 11.0
27141141
ETIM 4.0
EC000901
Height NS 15
34 mm
Tightening torque, min
0.6 Nm
Conductor cross section solid max.
6 mm²
Min. AWG conductor cross section, flexible
24
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Number of positions
1
Color
green-yellow
Insulating material group
I
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Oscillation, broadband noise test result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
UNSPSC 7.0901
39121410
Acceleration
5g
Test duration per axis
5 h
Shock form
Half-sine
Number of shocks per direction
3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
End cover width
2.2 mm
UNSPSC 18.0
39121410
Number of connections
2
Insulating material
PA
Nominal voltage UN
500 V
Back of the hand protection
Not guaranteed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Note
Please observe the current carrying capacity of the DIN rails.
Stripping length
9 mm
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible max.
6 mm²
Max. AWG conductor cross section, flexible
10
Degree of pollution
3
Open side panel
Yes
Finger protection
Not guaranteed
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Width
6.2 mm
Screw thread
M3
Tightening torque max
0.8 Nm
Conductor cross section AWG max.
10
UNSPSC 21.0
39121410
UNSPSC 11
39121410

Product condition