3248036 Phoenix Contact Terminal Blocks

Product Details

• Bending test turns
  135
• Conductor cross section solid max.
  6 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  4 mm²
• Requirements, voltage drop
  ≤ 3.2 mV
• End cover width
  2.2 mm
• Conductor cross section flexible max.
  6 mm²
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ECLASS 4.1
  27141100
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  2.5 mm²
• Min. AWG conductor cross section, flexible
  24
• 2 conductors with same cross section, solid max.
  1.5 mm²
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• ECLASS 10.0.1
  27141120
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• Potentials
  1
• Rated surge voltage
  6 kV
• Maximum load current
  41 A (with 6 mm² conductor cross section)
• Back of the hand protection
  guaranteed
• Surge voltage test setpoint
  7.3 kV
• Short-time current
  0.72 kA
Number of levels
1
Insulating material
PA
Overvoltage category
III
Number of connections
2
Color
blue
Maximum power dissipation for nominal condition
1.02 W
Nominal voltage UN
500 V
Finger protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Short circuit stability result
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 15
34 mm
Tightening torque, min
0.6 Nm
Nominal cross section
4 mm²
Flammability rating according to UL 94
V0
Degree of pollution
3
Nominal current IN
32 A (with 4 mm² conductor cross section)
Open side panel
Yes
Result of flexion and pull-out test
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Bending test rotation speed
10 rpm
Result of voltage-drop test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Screw thread
M3
Conductor cross section AWG max.
10
Max. AWG conductor cross section, flexible
10
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 7.0
27141120
ETIM 4.0
EC001329
UNSPSC 11
39121410
UNSPSC 18.0
39121410
UNSPSC 20.0
39121410
Power frequency withstand voltage setpoint
1.89 kV
Tight fit on carrier
NS 15
Conductor cross section short circuit testing
6 mm²
ASD level
6.12 (m/s2)2/Hz
Oscillation, broadband noise test result
Test passed
ECLASS 11.0
27141120
Insulating material group
I
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of power-frequency withstand voltage test
Test passed
Test duration per axis
5 h
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Width
6.2 mm
Acceleration
30g
Shock form
Semi-sinusoidal
Shock test result
Test passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Tightening torque max
0.8 Nm
ECLASS 5.1
27141100
ETIM 6.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 12.01
39121410
Stripping length
9 mm
Result of surge voltage test
Test passed
Tensile test result
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
UNSPSC 19.0
39121410
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test spectrum
Service life test category 2, bogie-mounted
Shock duration
18 ms
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Connection method
Screw connection
Length
29.9 mm
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
ECLASS 6.0
27141100
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Internal cylindrical gage
A4
ECLASS 4.0
27141100
ETIM 3.0
EC000897
ETIM 7.0
EC000897
UNSPSC 6.01
30211811
Connection in acc. with standard
CSA
Conductor cross section flexible min.
0.2 mm²
2 conductors with same cross section, solid min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
ECLASS 5.0
27141100
ECLASS 9.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410