3248035 Phoenix Contact Terminal Blocks
Part#:3248035
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 171
Nov 21, 2024
Mini feed-through terminal block, nom. voltage: 500 V, nominal current: 32 A, connection method: Screw connection, number of connections: 2, number of positions: 1, cross section: 0.2 mm² - 6 mm², AWG: 24 - 10, width: 6.2 mm, color: gray, mounting type: N
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 3248035 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- ECLASS 6.0 27141100
- UNSPSC 6.01 30211811
- UNSPSC 12.01 39121410
- ECLASS 4.0 27141100
- ETIM 7.0 EC000897
- UNSPSC 18.0 39121410
- ECLASS 10.0.1 27141120
- UNSPSC 11 39121410
- UNSPSC 13.2 39121410
- ETIM 4.0 EC001329
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- Connection method Screw connection
- Conductor cross section solid max. 6 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve max. 4 mm²
- Relative insulation material temperature index (Elec., UL 746 B) 130 °C
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- Conductor cross section solid min. 0.2 mm²
- Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm²
- UNSPSC 21.0 39121410
- Conductor cross section flexible, with ferrule with plastic sleeve max. 4 mm²
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 2.5 mm²
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 130°C)
- UNSPSC 20.0 39121410
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- Stripping length 9 mm
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
- End cover width 2.2 mm
- Tightening torque max 0.8 Nm
- Conductor cross section AWG max. 10
- Conductor cross section flexible min. 0.2 mm²
- Min. AWG conductor cross section, flexible 24
- Permissible humidity (storage/transport) 30 % ... 70 %
- Conductor cross section flexible max. 6 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm²
- 2 conductors with same cross section, stranded max. 1.5 mm²
- ECLASS 7.0 27141120
- UNSPSC 7.0901 39121410
- Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum 0.25 mm²
- Nominal cross section 4 mm²
- Insulating material group I
- Nominal voltage UN 500 V
- Number of positions 1
- Insulating material PA
- Rated surge voltage 6 kV
- Back of the hand protection guaranteed
- Bending test conductor cross section/weight 0.2 mm² / 0.2 kg
- 2 conductors with same cross section, stranded min. 0.2 mm²
- Ambient temperature (assembly) -5 °C ... 70 °C
- ECLASS 11.0 27141120
- ECLASS 4.1 27141100
- ECLASS 9.0 27141120
- Overvoltage category III
- Result of tight fit on support Test passed
- Conductor cross section short circuit testing 6 mm²
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03
- Test duration per axis 5 h
- Shock test result Test passed
- Shock duration 18 ms
- Number of shocks per direction 3
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
- Length 29.9 mm
- Screw thread M3
- Connection in acc. with standard CSA
- Max. AWG conductor cross section, flexible 10
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum 0.5 mm²
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 5.0 27141100
- ETIM 3.0 EC000897
- Color gray
- Maximum load current 41 A (with 6 mm² conductor cross section)
- Result of surge voltage test Test passed
- Bending test rotation speed 10 rpm
- Tractive force setpoint 160 N
- Tight fit on carrier NS 15
- Short circuit stability result Test passed
- Short-time current 0.72 kA
- Test spectrum Service life test category 1, class B, body mounted
- 2 conductors with same cross section, solid min. 0.2 mm²
- Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum 1.5 mm²
- Power frequency withstand voltage setpoint 1.89 kV
- Number of levels 1
- Potentials 1
- Flammability rating according to UL 94 V0
- Open side panel Yes
- Result of power-frequency withstand voltage test Test passed
- Conductor cross section tensile test 6 mm²
- 2 conductors with same cross section, solid max. 1.5 mm²
- Internal cylindrical gage A4
- Ambient temperature (actuation) -5 °C ... 70 °C
- Nominal current IN 32 A (with 4 mm² conductor cross section)
- Result of temperature-rise test Test passed
- Proof of thermal characteristics (needle flame) effective duration 30 s
- Acceleration 30g
- Shock form Semi-sinusoidal
- Static insulating material application in cold -60 °C
- Number of connections 2
- Degree of pollution 3
- Maximum power dissipation for nominal condition 1.02 W
- Finger protection guaranteed
- Result of flexion and pull-out test Test passed
- Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
- Tensile test result Test passed
- Requirements, voltage drop U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1
- Note When aligning several blocks, it is recommended to either place a DIN rail adapter underneath the connection point or a flange element between the blocks.
- Result of thermal test Test passed
- Width 6.2 mm
- Surge voltage test setpoint 7.3 kV
- Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed
- Bending test turns 135
- Result of voltage-drop test Test passed
- Requirement temperature-rise test Increase in temperature ≤ 45 K
- Oscillation, broadband noise test result Test passed
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- ECLASS 5.1 27141100
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
- Surface flammability NFPA 130 (ASTM E 162) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- Height NS 15 34 mm
- Tightening torque, min 0.6 Nm
- Conductor cross section AWG min. 24
- Test directions X-, Y- and Z-axis (pos. and neg.)
- ETIM 6.0 EC000897
- UNSPSC 19.0 39121410
- Test frequency f1 = 5 Hz to f2 = 250 Hz
- Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03
- ASD level 6.12 (m/s2)2/Hz
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 24h!
1-year warranty
$2.29
Stock:
171
Select Qty:
$2.29
$2.29 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨