3244560 Phoenix Contact Terminal Blocks

Product Details

• Potentials
  2
• Maximum load current
  20 A
• Number of connections
  2
• Insulating material
  PA
• Maximum power dissipation for nominal condition
  0.77 W (the value is multiplied when connecting multiple levels)
• Back of the hand protection
  guaranteed
• Finger protection
  guaranteed
• Tensile test result
  Test passed
• Setpoint
  1 N
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Height NS 35/15
  49 mm
• Connection in acc. with standard
  IEC 60947-7-1/IEC 60947-7-2
• Conductor cross section flexible min.
  0.2 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.34 mm²
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• ECLASS 11.0
  27141128
ECLASS 9.0
27141128
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
Nominal cross section
2.5 mm²
Degree of pollution
3
Nominal current IN
20 A
Note
Please observe the current carrying capacity of the DIN rails.
Power frequency withstand voltage setpoint
1.5 kV
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Conductor cross section short circuit testing
4 mm²
Result of aging test
Test passed
Oscillation, broadband noise test result
Test passed
Shock test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
End cover width
2.2 mm
Height NS 35/7,5
41.5 mm
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141128
ECLASS 4.1
27141100
ETIM 4.0
EC000897
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Number of levels
3
Color
orange
Rated surge voltage
4 kV
Insulating material group
I
Open side panel
Yes
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 35
Result of voltage-drop test
Test passed
Short-time current
0.48 kA
Ageing test for screwless modular terminal block temperature cycles
192
Acceleration
30g
ASD level
6.12 (m/s2)2/Hz
Shock form
Half-sine
Width
7 mm
Stripping length
8 mm ... 10 mm
Conductor cross section solid min.
0.34 mm²
Min. AWG conductor cross section, flexible
24
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ETIM 6.0
EC000900
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
UNSPSC 18.0
39121410
Flammability rating according to UL 94
V0
Overvoltage category
III
Nominal voltage UN
250 V
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
10 s
Test spectrum
Service life test category 2, bogie-mounted
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Conductor cross section AWG min.
24
Conductor cross section solid max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Internal cylindrical gage
A3
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 7.0
27141128
ECLASS 6.0
27141100
ETIM 3.0
EC000897
UNSPSC 12.01
39121410
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of power-frequency withstand voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test turns
135
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
Test duration per axis
5 h
Shock duration
18 ms
Length
74.4 mm
Connection method
Push-in connection
Conductor cross section AWG max.
12
Max. AWG conductor cross section, flexible
14
Connection cross sections directly pluggable
0.34 mm² 4 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.0
27141100
ECLASS 5.1
27141100
ETIM 7.0
EC000900
UNSPSC 20.0
39121410