3244470 Phoenix Contact Terminal Blocks

Product Details

• End cover width
  0.8 mm
• Number of connections
  7
• Insulating material
  PA
• Degree of pollution
  3
• Nominal current IN
  13.5 A
• Finger protection
  guaranteed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
• Conductor cross section short circuit testing
  1.5 mm²
• Short circuit stability result
  Test passed
• Oscillation, broadband noise test result
  Test passed
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Shock duration
  30 ms
• Static insulating material application in cold
  -60 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Width
  3.5 mm
• Number of levels
  5
• Rated surge voltage
  4 kV
• Open side panel
  Yes
• Nominal voltage UN
  250 V
Result of power-frequency withstand voltage test
Test passed
Result of tight fit on support
Test passed
Result of voltage-drop test
Test passed
Short-time current
0.18 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Acceleration
5g
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/7,5
52.1 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section AWG min.
26
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.0
27141118
ECLASS 5.0
27141100
ECLASS 7.0
27141128
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Color
gray
Maximum load current
13.5 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of flexion and pull-out test
Test passed
Bending test rotation speed
10 rpm
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of aging test
Test passed
Test spectrum
Service life test category 1, class B, body mounted
Test duration per axis
5 h
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Height
44.6 mm
Stripping length
8 mm ... 10 mm
Conductor cross section solid max.
1.5 mm²
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule with plastic sleeve max.
1 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141128
ECLASS 5.1
27141100
ETIM 4.0
EC000897
ETIM 7.0
EC000900
UNSPSC 13.2
39121410
Potentials
5
Flammability rating according to UL 94
V0
Insulating material group
I
Result of surge voltage test
Test passed
Power frequency withstand voltage setpoint
1.5 kV
Tensile test result
Test passed
Setpoint
1 N
Ageing test for screwless modular terminal block temperature cycles
192
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Shock test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section solid min.
0.25 mm²
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Connection cross sections directly pluggable
0.25 mm² 1.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 6.0
27141100
ECLASS 9.0
27141128
ETIM 6.0
EC000900
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Nominal cross section
1.5 mm²
Overvoltage category
III
Back of the hand protection
guaranteed
Bending test turns
135
Tight fit on carrier
NS 35
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
ASD level
0.964 (m/s2)2/Hz
Height NS 35/15
59.6 mm
Length
121.65 mm
Conductor cross section AWG max.
14
Conductor cross section flexible max.
1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Internal cylindrical gage
A1 / B1
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141128
ECLASS 4.1
27141118
ETIM 3.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
UNSPSC 21.0
39121410