3244467 Phoenix Contact Terminal Blocks

Product Details

• Color
  gray
• Height
  40 mm
• Insulating material
  PA
• Degree of pollution
  3
• Maximum power dissipation for nominal condition
  0.56 W (the value is multiplied when connecting multiple levels)
• Open side panel
  Yes
• Power frequency withstand voltage setpoint
  1.5 kV
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
• Result of voltage-drop test
  Test passed
• Result of temperature-rise test
  Test passed
• Result of aging test
  Test passed
• Acceleration
  30g
• Test duration per axis
  5 h
• Shock form
  Half-sine
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Nominal cross section
  1.5 mm²
• Maximum load current
  13.5 A
• Connection in acc. with standard
  IEC 60947-7-1/IEC 60947-7-2
• Result of surge voltage test
  Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tractive force setpoint
40 N
Requirements, voltage drop
≤ 3.2 mV
Ageing test for screwless modular terminal block temperature cycles
192
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
End cover width
2.2 mm
Height NS 35/7,5
41.5 mm
Conductor cross section solid min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
1 mm² Using the AI-S 1-8 TQ ferrule, Order No. 1200293, is recommended
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.0
27141100
ECLASS 5.1
27141100
ETIM 6.0
EC000900
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
Overvoltage category
III
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Surge voltage test setpoint
4.8 kV
Bending test turns
135
Tight fit on carrier
NS 35
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section flexible max.
1.5 mm²
Conductor cross section AWG max.
14
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
Number of connections
5
Insulating material group
I
Nominal voltage UN
24 V
Finger protection
guaranteed
Result of flexion and pull-out test
Test passed
Conductor cross section tensile test
1.5 mm²
Tensile test result
Test passed
Conductor cross section short circuit testing
1.5 mm²
Short-time current
0.18 kA
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
90.8 mm
Height NS 35/15
48.5 mm
Conductor cross section AWG min.
26
Stripping length
8 mm
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 6.0
27141100
Number of levels
4
Flammability rating according to UL 94
V0
Rated surge voltage
4 kV
Nominal current IN
13.5 A
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Result of tight fit on support
Test passed
Setpoint
1 N
Result of thermal test
Test passed
Oscillation, broadband noise test result
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
3.5 mm
Note
Please observe the current carrying capacity of the DIN rails.
Conductor cross section solid max.
1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
UNSPSC 21.0
39121410
Conductor cross section flexible min.
0.14 mm²
Connection method
Push-in connection
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.1
27141100
ECLASS 7.0
27141128
UNSPSC 11
39121410
UNSPSC 13.2
39121410
Internal cylindrical gage
A1 / B1
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 11.0
27141128
ECLASS 10.0.1
27141128
ETIM 4.0
EC000897
ETIM 7.0
EC000900
UNSPSC 18.0
39121410
ECLASS 9.0
27141128
UNSPSC 12.01
39121410