3244339 Phoenix Contact Terminal Blocks

Product Details

• Result of tight fit on support
  Test passed
• Power frequency withstand voltage setpoint
  2 kV
• Result of aging test
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• Oscillation, broadband noise test result
  Test passed
• Test spectrum
  Service life test category 1, class B, body mounted
• ETIM 6.0
  EC000897
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• ETIM 7.0
  EC000897
• UNSPSC 19.0
  39121410
• Max. AWG conductor cross section, flexible
  14
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  0.5 mm²
• UNSPSC 12.01
  39121410
• UNSPSC 20.0
  39121410
• ECLASS 5.1
  27141100
• ETIM 3.0
  EC000897
• UNSPSC 11
  39121410
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ECLASS 11.0
  27141120
Flammability rating according to UL 94
V0
Overvoltage category
III
Open side panel
Yes
Number of connections
4
Rated surge voltage
8 kV
Nominal current IN
24 A
Setpoint
1 N
Nominal cross section
2.5 mm²
Maximum power dissipation for nominal condition
0.77 W
Insulating material group
I
Number of levels
1
Insulating material
PA
Maximum load current
30 A (with 4 mm² conductor cross section)
Back of the hand protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Short-time current
0.48 kA
Degree of pollution
3
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Color
gray
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of surge voltage test
Test passed
Bending test conductor cross section/weight
0.08 mm² / 0.1 kg
Result of temperature-rise test
Test passed
Short circuit stability result
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
30 ms
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Width
10.4 mm
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Stripping length
8 mm
Conductor cross section solid max.
4 mm²
Min. AWG conductor cross section, flexible
28
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
ECLASS 4.0
27141100
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 6.0
27141100
ECLASS 7.0
27141120
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
Result of flexion and pull-out test
Test passed
Conductor cross section short circuit testing
4 mm²
Test duration per axis
5 h
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Finger protection
guaranteed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
End cover width
4 mm
Height
22 mm
Internal cylindrical gage
A3
Permissible humidity (storage/transport)
30 % ... 70 %
ETIM 2.0
EC000902
UNSPSC 21.0
39121410
UNSPSC 13.2
39121410
Connection method
Spring-cage connection
Conductor cross section AWG min.
28
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
ECLASS 10.0.1
27141120
Nominal voltage UN
800 V
Tight fit on carrier
NS 35
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Acceleration
5g
Hole diameter
3.5 mm
ECLASS 4.1
27141100
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Ageing test for screwless modular terminal block temperature cycles
192
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Length
32 mm
Bending test rotation speed
10 rpm
Result of thermal test
Test passed
Plate thickness
0.6 mm ... 1.5 mm
Conductor cross section solid min.
0.08 mm²
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Result of voltage-drop test
Test passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Drill hole spacing
10.3 mm
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Conductor cross section flexible max.
2.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 5.0
27141100
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Connection in acc. with standard
CSA
Connection
1 level
ASD level
1.857 (m/s2)2/Hz
Shock test result
Test passed
Conductor cross section flexible min.
0.08 mm²
ECLASS 9.0
27141120