3216066 Phoenix Contact Terminal Blocks

Product Details

• Potentials
  1
• Overvoltage category
  III
• Flammability rating according to UL 94
  V2
• Nominal cross section
  4 mm²
• Number of positions
  1
• Color
  brown
• Insulating material
  PA
• Nominal voltage UN
  500 V (With tightened clamping screws)
• Height NS 35/7,5
  47 mm
• Back of the hand protection
  guaranteed
• Height NS 32
  52 mm
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
  0.5 mm²
• Degree of pollution
  3
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Maximum load current
  32 A (in case of a 4 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
• Ageing test for screwless modular terminal block temperature cycles
  192
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Maximum power dissipation for nominal condition
  1.02 W (the value is multiplied when connecting multiple levels)
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
Length
50.5 mm
Connection in acc. with standard
CSA
UNSPSC 19.0
39121410
Test duration per axis
5 h
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/15
54.5 mm
Stripping length
8 mm
Conductor cross section AWG min.
24
ETIM 6.0
EC000897
Nominal current IN
32 A (with 4 mm² conductor cross section)
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Static insulating material application in cold
-60 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Screw thread
M3
Tightening torque, min
0.6 Nm
Conductor cross section solid max.
4 mm²
ECLASS 6.0
27141100
Number of levels
2
Result of surge voltage test
Test passed
Bending test turns
135
Tensile test result
Test passed
Requirements, voltage drop
U1 ≤ 3,2 mVU2 ≤ 1,5 x U1dT ≤ 45 K
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 5.1
27141100
ECLASS 9.0
27141120
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Setpoint
1 N
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock form
Half-sine
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
REACh SVHC
Lead 7439-92-1
ECLASS 11.0
27141120
ECLASS 4.0
27141100
ETIM 2.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Tractive force setpoint
60 N
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
ASD level
6.12 (m/s2)2/Hz
Number of shocks per direction
3
End cover width
2 mm
Conductor cross section AWG max.
12
Conductor cross section flexible max.
4 mm²
Cross section with insertion bridge, stranded max.
4 mm²
2 conductors with same cross section, solid min.
0.2 mm²
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 7.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Surge voltage test setpoint
7.2 kV
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Result of tight fit on support
Test passed
Result of voltage-drop test
Test passed
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Internal cylindrical gage
A4
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
ECLASS 5.0
27141100
ETIM 3.0
EC000897
ETIM 4.0
EC000897
Test spectrum
Service life test category 2, bogie-mounted
Shock duration
18 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection method
Screw connection
ETIM 7.0
EC000897
Max. AWG conductor cross section, flexible
12
Cross section with insertion bridge, solid max.
4 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 125°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
Acceleration
30g
Surface flammability NFPA 130 (ASTM E 162)
passed
Width
6.2 mm
Connection
1 level
Tightening torque max
0.8 Nm
Number of connections
3
Rated surge voltage
6 kV
Insulating material group
I
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Open side panel
Yes
Result of flexion and pull-out test
Test passed
Short circuit stability result
Test passed
UNSPSC 21.0
39121410
Finger protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Conductor cross section tensile test
4 mm²
Result of thermal test
Test passed
Conductor cross section solid min.
0.2 mm²
Result of power-frequency withstand voltage test
Test passed
Tight fit on carrier
NS 32/NS 35
Short-time current
0.00048 kA
Test directions
X-, Y- and Z-axis (pos. and neg.)
China RoHS
Environmentally Friendly Use Period = 50 years
Conductor cross section short circuit testing
4000000 mm²
Bending test rotation speed
10 (+/- 2) rpm
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²