3074130 Phoenix Contact Terminal Blocks
Part#:3074130
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 50
Nov 24, 2024
Feed-through terminal block, nom. voltage: 1000 V, nominal current: 125 A, connection method: Screw connection, number of connections: 2, cross section: 10 mm² - 35 mm², AWG: 8 - 2, width: 16 mm, color: gray, mounting type: NS 35/7,5, NS 35/15
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 3074130 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Number of connections 2
- Insulating material PA
- Overvoltage category III
- Nominal current IN 125 A
- Finger protection guaranteed
- Bending test turns 135
- Conductor cross section tensile test 35 mm²
- Tight fit on carrier NS 35
- Potentials 1
- Setpoint 10 N
- Insulating material group I
- Open side panel No
- Power frequency withstand voltage setpoint 2.2 kV
- Color gray
- Degree of pollution 3
- Maximum load current 125 A
- Result of surge voltage test Test passed
- Bending test rotation speed 10 (+/- 2) rpm
- Tensile test result Test passed
- Requirement temperature-rise test Increase in temperature ≤ 45 K
- Proof of thermal characteristics (needle flame) effective duration 30 s
- Shock test result Test passed
- Number of shocks per direction 3
- Shock duration 18 ms
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- Note Terminal point
- Number of levels 1
- Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
- Back of the hand protection guaranteed
- Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed
- Result of flexion and pull-out test Test passed
- Result of tight fit on support Test passed
- Result of temperature-rise test Test passed
- Test spectrum Service life test category 2, bogie-mounted
- Test frequency f1 = 5 Hz to f2 = 250 Hz
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Surface flammability NFPA 130 (ASTM E 162) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- Width 16 mm
- Height NS 35/7,5 62 mm
- Connection in acc. with standard IEC 60947-7-1
- Rated surge voltage 8 kV
- Nominal voltage UN 1000 V
- Result of power-frequency withstand voltage test Test passed
- Bending test conductor cross section/weight 10 mm² / 2 kg
- Requirements, voltage drop U1 ≤ 3,2 mVU2 ≤ 1,5 x U1dT ≤ 45 K
- Test duration per axis 5 h
- Shock form Half-sine
- Relative insulation material temperature index (Elec., UL 746 B) 130 °C
- Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
- Height NS 35/15 69.5 mm
- Tightening torque max 3.7 Nm
- Conductor cross section flexible max. 35 mm²
- Conductor cross section AWG max. 2
- Max. AWG conductor cross section, flexible 2
- Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum 6 mm²
- Ambient temperature (actuation) -5 °C ... 70 °C
- ECLASS 11.0 27141120
- ECLASS 5.1 27141100
- ETIM 2.0 EC000897
- ETIM 6.0 EC000897
- UNSPSC 18.0 39121410
- Nominal cross section 35 mm²
- Flammability rating according to UL 94 V0
- Maximum power dissipation for nominal condition 4.06 W
- Surge voltage test setpoint 9.6 kV
- Tractive force setpoint 190 N
- Result of voltage-drop test Test passed
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2018-05
- Acceleration 30g
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- Length 54.5 mm
- Connection method Screw connection
- Conductor cross section solid min. 10 mm²
- Min. AWG conductor cross section, flexible 8
- 2 conductors with same cross section, solid max. 16 mm²
- 2 conductors with same cross section, stranded max. 10 mm²
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- Ambient temperature (assembly) -5 °C ... 70 °C
- ECLASS 4.0 27141100
- ECLASS 6.0 27141100
- UNSPSC 13.2 39121410
- UNSPSC 20.0 39121410
- Result of thermal test Test passed
- ASD level 6.12 (m/s2)2/Hz
- Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03
- Static insulating material application in cold -60 °C
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- Screw thread M6
- Stripping length 16 mm
- Conductor cross section AWG min. 8
- Conductor cross section flexible, with ferrule without plastic sleeve max. 35 mm²
- 2 conductors with same cross section, solid min. 6 mm²
- 2 conductors with same cross section, stranded min. 6 mm²
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 130°C)
- Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum 10 mm²
- ECLASS 10.0.1 27141120
- ECLASS 7.0 27141120
- ETIM 4.0 EC000897
- UNSPSC 12.01 39121410
- UNSPSC 11 39121410
- Tightening torque, min 3.2 Nm
- Conductor cross section solid max. 35 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve min. 10 mm²
- Conductor cross section flexible, with ferrule with plastic sleeve max. 35 mm²
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum 6 mm²
- China RoHS Environmentally friendly use period: unlimited = EFUP-e
- ECLASS 5.0 27141100
- ETIM 3.0 EC000897
- ETIM 7.0 EC000897
- UNSPSC 7.0901 39121410
- UNSPSC 21.0 39121410
- Conductor cross section flexible min. 10 mm²
- Conductor cross section flexible, with ferrule with plastic sleeve min. 10 mm²
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 10 mm²
- Permissible humidity (storage/transport) 30 % ... 70 %
- ECLASS 4.1 27141100
- ECLASS 9.0 27141120
- UNSPSC 6.01 30211811
- UNSPSC 19.0 39121410
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 24h!
1-year warranty
$13.42
Stock:
50
Select Qty:
$13.42
$13.42 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨