3069841 Phoenix Contact Terminal Blocks

Product Details

• ECLASS 6.0
  27141100
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• ASD level
  6.12 (m/s2)2/Hz
• Shock test result
  Test passed
• Shock duration
  18 ms
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Width
  179.3 mm
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Length
  81 mm
• Connection method
  Push-in connection
• Connection in acc. with standard
  IEC 60947-7-1
• Stripping length
  12 mm
• Conductor cross section AWG min.
  20
• Conductor cross section AWG max.
  8
• Conductor cross section flexible max.
  6 mm²
• Min. AWG conductor cross section, flexible
  20
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  1 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Connection cross sections directly pluggable
1 mm² 10 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (assembly)
-5 °C ... 70 °C
Number of positions
18
Number of connections
36
Nominal cross section
6 mm²
Rated surge voltage
4 kV
Color
gray
Overvoltage category
III
Nominal voltage UN
400 V AC/DC
Maximum load current
30 A (with 6 mm² conductor cross section)
Open side panel
No
Note regarding shock protection
When test disconnect plug is plugged in.
Result of surge voltage test
Test passed
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Setpoint
5 N
Insulating material
PA
Flammability rating according to UL 94
V0
Number of levels
1
Potentials
18
Insulating material group
I
Test surge voltage
5 kV
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height
56.5 mm
Connection
1 level
Pitch
8.2 mm
Conductor cross section solid min.
1 mm²
Conductor cross section solid max.
10 mm²
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
1 mm²
Max. AWG conductor cross section, flexible
10
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Internal cylindrical gage
A5
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Mounting type
Wall mounting
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 10.0.1
27141148
ECLASS 7.0
27141148
ETIM 4.0
EC000902
ECLASS 9.0
27141148
UNSPSC 18.0
20122006
UNSPSC 19.0
20122006
UNSPSC 13.2
20122006
ETIM 6.0
EC002555
ETIM 7.0
EC002555
UNSPSC 20.0
20122006
UNSPSC 21.0
20122006
Short-time current
0.15 kA
Acceleration
30g
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Tensile test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Result of temperature-rise test
Test passed
Result of tight fit on support
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
ECLASS 5.1
27141100
Power frequency withstand voltage setpoint
1.89 kV
Bending test turns
135
Result of voltage-drop test
Test passed
Short circuit stability result
Test passed
Oscillation, broadband noise test result
Test passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
ECLASS 11.0
27141148
Result of thermal test
Test passed
Result of aging test
Test passed
Test duration per axis
5 h
Number of shocks per direction
3
REACh SVHC
Lead 7439-92-1
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Conductor cross section short circuit testing
4 mm²
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Maximum power dissipation for nominal condition
1.31 W
Finger protection
guaranteed
Result of flexion and pull-out test
Test passed
Note
The measuring transducer block is replaced every 100 cycles.
Back of the hand protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Test spectrum
Service life test category 2, bogie-mounted