3069668 Phoenix Contact Terminal Blocks

Product Details

• Number of positions
  18
• Color
  gray
• Maximum load current
  30 A (with 10 mm² conductor cross section)
• Power frequency withstand voltage setpoint
  1.89 kV
• Bending test rotation speed
  10 rpm
• Result of temperature-rise test
  Test passed
• Conductor cross section short circuit testing
  4 mm²
• Result of aging test
  Test passed
• Shock test result
  Test passed
• Number of shocks per direction
  3
• Static insulating material application in cold
  -60 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Pitch
  8.2 mm
• Screw thread
  M4
• Insulating material
  PA
• Nominal voltage UN
  400 V AC/DC
• Length
  81 mm
• Number of levels
  1
• Insulating material group
  I
• Result of power-frequency withstand voltage test
  Test passed
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Width
179.3 mm
Acceleration
30g
Shock form
Half-sine
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Bending test turns
135
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Result of voltage-drop test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Potentials
18
Rated surge voltage
4 kV
Result of surge voltage test
Test passed
Note
25 pos.
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Nominal cross section
6 mm²
Test surge voltage
5 kV
Open side panel
No
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Result of thermal test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Connection
1 level
Tightening torque, min
1.5 Nm
Number of connections
36
Flammability rating according to UL 94
V0
Overvoltage category
III
Maximum power dissipation for nominal condition
1.31 W
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Setpoint
5 N
Short-time current
500 A
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test directions
X-, Y- and Z-axis (pos. and neg.)
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection method
Screw connection
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Tightening torque max
1.8 Nm
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
2 conductors with same cross section, solid min.
0.2 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.1
27141100
ETIM 4.0
EC000901
ECLASS 11.0
27141148
Conductor cross section AWG max.
8
2 conductors with same cross section, stranded max.
2.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Permissible humidity (storage/transport)
30 % ... 70 %
Stripping length
12 mm
Conductor cross section solid min.
0.2 mm²
Conductor cross section AWG min.
24
Max. AWG conductor cross section, flexible
8
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
2 conductors with same cross section, solid max.
2.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.1
27141100
ETIM 6.0
EC002555
Height
56.5 mm
Conductor cross section solid max.
10 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Internal cylindrical gage
A5
Mounting type
Wall mounting
Conductor cross section flexible max.
10 mm²
REACh SVHC
Lead 7439-92-1
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
UNSPSC 6.01
30211811
UNSPSC 20.0
20122006
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 6.0
27141100
ETIM 7.0
EC002555
UNSPSC 7.0901
39121410
UNSPSC 21.0
20122006
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
ECLASS 10.0.1
27141148
ECLASS 5.0
27141100
ECLASS 7.0
27141148
UNSPSC 18.0
20122006
UNSPSC 11
39121410
Test duration per axis
5 h
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
UNSPSC 12.01
39121410
UNSPSC 13.2
20122006
ECLASS 4.0
27141100
ECLASS 9.0
27141148
UNSPSC 19.0
20122006