3069658 Phoenix Contact Terminal Blocks

Product Details

• Screw thread
  M4
• Number of connections
  20
• Rated surge voltage
  4 kV
• Insulating material group
  I
• Color
  gray
• Open side panel
  No
• Power frequency withstand voltage setpoint
  1.89 kV
• Result of flexion and pull-out test
  Test passed
• Bending test rotation speed
  10 rpm
• Result of temperature-rise test
  Test passed
• Conductor cross section short circuit testing
  4 mm²
• Ageing test for screwless modular terminal block temperature cycles
  192
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Tightening torque max
  1.8 Nm
• Conductor cross section AWG max.
  8
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  6 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  6 mm²
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  2.5 mm²
• Permissible humidity (storage/transport)
  30 % ... 70 %
Max. tightening torque of the mounting screw:
1 Nm
REACh SVHC
Lead 7439-92-1
Number of positions
10
Nominal cross section
6 mm²
Insulating material
PA
Flammability rating according to UL 94
V0
Terminal block mounting
0.8 Nm ... 1 Nm
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Setpoint
5 N
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection method
Screw connection
Pitch
8.2 mm
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible min.
0.2 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.1
27141100
ECLASS 7.0
27141126
ETIM 4.0
EC000897
Number of levels
1
Overvoltage category
III
Maximum load current
30 A (with 10 mm² conductor cross section)
Result of surge voltage test
Test passed
Result of tight fit on support
Test passed
Note
25 pos.
Short-time current
500 A
Result of aging test
Test passed
Test duration per axis
5 h
Shock duration
18 ms
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Tightening torque, min
1.5 Nm
Potentials
10
Test surge voltage
5 kV
Nominal voltage UN
400 V AC/DC
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Result of thermal test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Shock test result
Test passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Height
56.5 mm
Connection
1 level
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Maximum power dissipation for nominal condition
1.31 W
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Oscillation, broadband noise test result
Test passed
Acceleration
30g
Number of shocks per direction
3
Shock form
Half-sine
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
114.8 mm
Length
81 mm
Stripping length
12 mm
Min. AWG conductor cross section, flexible
24
UNSPSC 18.0
39121410
Plate thickness
1 mm ... 4 mm
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Min. tightening torque of the mounting screw:
0.8 Nm
UNSPSC 6.01
30211811
UNSPSC 20.0
39121410
UNSPSC 21.0
39121410
Result of voltage-drop test
Test passed
2 conductors with same cross section, stranded max.
2.5 mm²
ECLASS 4.0
27141100
ECLASS 11.0
27141126
ETIM 7.0
EC000902
UNSPSC 13.2
39121410
Mounting type
Wall mounting
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ETIM 6.0
EC000902
UNSPSC 7.0901
39121410
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Internal cylindrical gage
A5
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
UNSPSC 12.01
39121410
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Static insulating material application in cold
-60 °C
2 conductors with same cross section, solid max.
2.5 mm²
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
ECLASS 5.0
27141100
UNSPSC 19.0
39121410
ASD level
6.12 (m/s2)2/Hz
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
ECLASS 6.0
27141100
UNSPSC 11
39121410
2 conductors with same cross section, solid min.
0.2 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.1
27141100
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible max.
10 mm²
ECLASS 10.0.1
27141126
Ambient temperature (assembly)
-5 °C ... 70 °C
Conductor cross section solid max.
10 mm²
Max. AWG conductor cross section, flexible
8
ECLASS 9.0
27141126