3069438 Phoenix Contact Terminal Blocks

Product Details

• Conductor cross section flexible min.
  0.5 mm²
• China RoHS
  Environmentally friendly use period: unlimited = EFUP-e
• Number of positions
  7
• Potentials
  7
• Number of levels
  1
• Nominal cross section
  6 mm²
• Rated surge voltage
  4 kV
• Overvoltage category
  III
• Open side panel
  No
• Back of the hand protection
  guaranteed
• Result of tight fit on support
  Test passed
• Result of voltage-drop test
  Test passed
• Bending test conductor cross section/weight
  0.5 mm² / 0.3 kg
• Short circuit stability result
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Short-time current
  0.15 kA
• Oscillation, broadband noise test result
  Test passed
• Ageing test for screwless modular terminal block temperature cycles
  192
• ASD level
  6.12 (m/s2)2/Hz
• Test duration per axis
  5 h
Shock test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Shock duration
18 ms
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Width
90.2 mm
Length
100 mm
Height
56.5 mm
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Internal cylindrical gage
A5
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Result of flexion and pull-out test
Test passed
Bending test turns
135
Tensile test result
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Conductor cross section short circuit testing
4 mm²
Result of aging test
Test passed
Conductor cross section flexible, with ferrule without plastic sleeve min.
1 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Min. tightening torque of the mounting screw:
0.8 Nm
ECLASS 10.0.1
27141126
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 9.0
27141126
ECLASS 7.0
27141126
Setpoint
5 N
Result of temperature-rise test
Test passed
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Min. AWG conductor cross section, flexible
20
Max. tightening torque of the mounting screw:
1 Nm
Connection cross sections directly pluggable
1 mm² 10 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
REACh SVHC
Lead 7439-92-1
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141126
ECLASS 5.1
27141100
ECLASS 6.0
27141100
UNSPSC 18.0
39121410
UNSPSC 20.0
39121410
UNSPSC 19.0
39121410
Mounting type
Wall mounting
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of power-frequency withstand voltage test
Test passed
Note regarding shock protection
When test disconnect plug is plugged in.
Test spectrum
Service life test category 2, bogie-mounted
Conductor cross section flexible, with ferrule with plastic sleeve min.
1 mm²
Finger protection
guaranteed
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Acceleration
30g
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid max.
10 mm²
Stripping length
12 mm
Conductor cross section flexible max.
6 mm²
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Pitch
8.2 mm
Plate thickness
1 mm ... 4 mm
Conductor cross section AWG min.
20
Result of thermal test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Surface flammability NFPA 130 (ASTM E 162)
passed
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section solid min.
1 mm²
Max. AWG conductor cross section, flexible
10
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Number of shocks per direction
3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Connection method
Push-in connection
Conductor cross section AWG max.
8
Maximum load current
30 A (with 6 mm² conductor cross section)
Result of surge voltage test
Test passed
Note
The measuring transducer block is replaced every 100 cycles.
Number of connections
14
Flammability rating according to UL 94
V0
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Power frequency withstand voltage setpoint
1.89 kV
Bending test rotation speed
10 rpm
Color
gray
Insulating material group
I
Insulating material
PA
Terminal block mounting
0.8 Nm ... 1 Nm
Test surge voltage
5 kV
Nominal voltage UN
400 V AC/DC
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
ETIM 4.0
EC000897
ETIM 6.0
EC000902
Maximum power dissipation for nominal condition
1.31 W
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
UNSPSC 13.2
39121410
ECLASS 5.0
27141100
Connection
1 level
ETIM 7.0
EC000902
UNSPSC 21.0
39121410