3069429 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section
  6 mm²
• Note
  A detailed circuit diagram can be found under Miscellaneous Downloads
• Insulating material
  PA
• Rated surge voltage
  4 kV
• Maximum load current
  30 A (with 10 mm² conductor cross section)
• Test surge voltage
  5 kV
• Potentials
  19
• Color
  gray
• Insulating material group
  I
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Width
  187.5 mm
• Height NS 35/15
  69.3 mm
• Screw thread
  M4
• Tightening torque max
  1.8 Nm
• Min. AWG conductor cross section, flexible
  24
• Conductor cross section flexible min.
  0.2 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  6 mm²
• 2 conductors with same cross section, stranded max.
  2.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
Number of positions
19
Nominal voltage UN
400 V AC/DC
Maximum power dissipation for nominal condition
1.31 W
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
100 mm
Height NS 35/7,5
61.8 mm
Pitch
8.2 mm
Max. AWG conductor cross section, flexible
8
Conductor cross section solid max.
10 mm²
Conductor cross section flexible max.
10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
Number of levels
1
Number of connections
38
Flammability rating according to UL 94
V0
Overvoltage category
III
Open side panel
No
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height
56.5 mm
Connection method
Screw connection
ECLASS 5.0
27141100
Connection
1 level
Stripping length
10 mm
Conductor cross section solid min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
ECLASS 11.0
27141126
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Internal cylindrical gage
A5
ECLASS 5.1
27141100
UNSPSC 13.2
39121410
ETIM 4.0
EC000897
Connection in acc. with standard
IEC 60947-7-1
2 conductors with same cross section, stranded min.
0.2 mm²
ECLASS 7.0
27141126
UNSPSC 19.0
39121410
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ETIM 7.0
EC000902
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
2 conductors with same cross section, solid min.
0.2 mm²
Mounting type
NS 35/7,5
Tightening torque, min
1.5 Nm
2 conductors with same cross section, solid max.
2.5 mm²
ECLASS 10.0.1
27141126
ECLASS 6.0
27141100
UNSPSC 20.0
39121410
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Conductor cross section AWG max.
8
Surface flammability NFPA 130 (ASTM E 162)
passed
ETIM 6.0
EC000902
ECLASS 9.0
27141126
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²