3069419 Phoenix Contact Terminal Blocks

Product Details

• Number of positions
  19
• Color
  gray
• Maximum power dissipation for nominal condition
  1.31 W
• Result of surge voltage test
  Test passed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Terminal block mounting
  0.8 Nm ... 1 Nm
• Bending test conductor cross section/weight
  0.2 mm² / 0.2 kg
• Tensile test result
  Test passed
• Short circuit stability result
  Test passed
• Result of thermal test
  Test passed
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Shock test result
  Test passed
• Static insulating material application in cold
  -60 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Pitch
  8.2 mm
• Conductor cross section solid max.
  10 mm²
• Conductor cross section flexible min.
  0.2 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.25 mm²
• Tightening torque max
  1.8 Nm
• Min. tightening torque of the mounting screw:
  0.8 Nm
Note
25 pos.
Potentials
19
Flammability rating according to UL 94
V0
Maximum load current
30 A (with 10 mm² conductor cross section)
Power frequency withstand voltage setpoint
1.89 kV
Bending test turns
135
Setpoint
5 N
Short-time current
500 A
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock duration
18 ms
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Height
56.5 mm
Number of connections
38
Insulating material group
I
Nominal voltage UN
400 V AC/DC
Result of flexion and pull-out test
Test passed
Result of tight fit on support
Test passed
Conductor cross section short circuit testing
4 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
Ageing test for screwless modular terminal block temperature cycles
192
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Acceleration
30g
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
100 mm
Tightening torque, min
1.5 Nm
Screw thread
M4
Conductor cross section flexible max.
10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
2 conductors with same cross section, stranded max.
2.5 mm²
Max. tightening torque of the mounting screw:
1 Nm
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 5.1
27141100
ETIM 3.0
EC000901
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
Number of levels
1
Nominal cross section
6 mm²
Rated surge voltage
4 kV
Open side panel
No
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of temperature-rise test
Test passed
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Test duration per axis
5 h
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Plate thickness
1 mm ... 4 mm
Connection method
Screw connection
Connection in acc. with standard
IEC 60947-7-1
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Mounting type
Wall mounting
ECLASS 11.0
27141126
Max. AWG conductor cross section, flexible
8
2 conductors with same cross section, solid max.
2.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 6.0
27141100
ETIM 7.0
EC000902
UNSPSC 21.0
39121410
Result of voltage-drop test
Test passed
Result of aging test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Shock form
Half-sine
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Width
188.6 mm
Connection
1 level
Conductor cross section AWG min.
24
Conductor cross section AWG max.
8
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 4.0
27141100
2 conductors with same cross section, solid min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
REACh SVHC
Lead 7439-92-1
ECLASS 9.0
27141126
ETIM 6.0
EC000902
UNSPSC 13.2
39121410
Stripping length
12 mm
Conductor cross section solid min.
0.2 mm²
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
Internal cylindrical gage
A5
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141126
ECLASS 5.0
27141100
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 7.0
27141126
ETIM 4.0
EC000897
UNSPSC 18.0
39121410
UNSPSC 20.0
39121410
Insulating material
PA
Overvoltage category
III
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Test surge voltage
5 kV