3069413 Phoenix Contact Terminal Blocks

Product Details

• Short-time current
  150 A
• Number of positions
  14
• Color
  gray
• Overvoltage category
  III
• Finger protection
  guaranteed
• Note regarding shock protection
  When plugged in
• Bending test rotation speed
  10 rpm
• Result of tight fit on support
  Test passed
• Result of temperature-rise test
  Test passed
• Note
  25 pos.
• Potentials
  14
• Rated surge voltage
  4 kV
• Insulating material group
  I
• Open side panel
  No
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of power-frequency withstand voltage test
  Test passed
• Setpoint
  5 N
• Result of aging test
  Test passed
• Result of thermal test
  Test passed
• ASD level
  6.12 (m/s2)2/Hz
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Stripping length
12 mm
Number of levels
1
Test surge voltage
5 kV
Maximum load current
30 A (with 10 mm² conductor cross section)
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Result of voltage-drop test
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Screw thread
M4
Connection
1 level
Conductor cross section AWG min.
24
Flammability rating according to UL 94
V0
Nominal cross section
6 mm²
Maximum power dissipation for nominal condition
1.31 W
Result of surge voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Conductor cross section short circuit testing
4 mm²
Ageing test for screwless modular terminal block temperature cycles
192
Acceleration
30g
Shock test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Number of connections
28
Insulating material
PA
Nominal voltage UN
400 V AC/DC
Terminal block mounting
0.8 Nm ... 1 Nm
Result of flexion and pull-out test
Test passed
Bending test turns
135
Short circuit stability result
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Shock duration
18 ms
Shock form
Half-sine
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
100 mm
Plate thickness
1 mm ... 4 mm
Height
56.5 mm
Tightening torque, min
1.5 Nm
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
2 conductors with same cross section, solid max.
2.5 mm²
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Pitch
8.2 mm
Tightening torque max
1.8 Nm
Conductor cross section flexible max.
10 mm²
Conductor cross section AWG max.
8
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
ECLASS 5.1
27141100
ETIM 3.0
EC000901
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
UNSPSC 21.0
39121410
ECLASS 4.0
27141100
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ETIM 6.0
EC000902
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Internal cylindrical gage
A5
ECLASS 9.0
27141126
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Proof of thermal characteristics (needle flame) effective duration
30 s
Oscillation, broadband noise test result
Test passed
Max. tightening torque of the mounting screw:
1 Nm
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 7.0
27141126
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141126
ECLASS 6.0
27141100
ETIM 7.0
EC000902
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Conductor cross section solid min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
2 conductors with same cross section, solid min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm²
Min. tightening torque of the mounting screw:
0.8 Nm
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
1.5 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
2 conductors with same cross section, stranded max.
2.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
REACh SVHC
Lead 7439-92-1
Width
147.6 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
ECLASS 4.1
27141100
ETIM 4.0
EC000897
Max. AWG conductor cross section, flexible
8
Connection method
Screw connection
Conductor cross section solid max.
10 mm²
Min. AWG conductor cross section, flexible
24
Mounting type
Wall mounting
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141126
UNSPSC 18.0
39121410
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²