3049835 Phoenix Contact Terminal Blocks

Product Details

• Note
  Note: the BE-RT... path extension is to be used for non-insulated cable lugs (see accessories).
• Nominal cross section
  2.5 mm²
• Rated surge voltage
  8 kV
• Result of surge voltage test
  Test passed
• Tight fit on carrier
  NS 35
• Result of temperature-rise test
  Test passed
• Short circuit stability result
  Test passed
• Width
  12.3 mm
• Connection in acc. with standard
  IEC 60947-7-1
• AWG min
  18
• Cable lug connection according to standard
  DIN 46237:1970-07
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• Color
  blue
• Number of levels
  1
• Maximum load current
  24 A (with a 2.5 mm² conductor cross section)
• Insulating material group
  I
• Nominal voltage UN
  1000 V
• Result of tight fit on support
  Test passed
• Result of voltage-drop test
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
Connection method
Bolt connection
Min. cross section for cable lug connection
1 mm²
Cable lug width, max.
6 mm
Tightening torque max
0.8 Nm
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.1
27141100
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
Number of connections
2
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
0.77 W
Degree of pollution
3
Power frequency withstand voltage setpoint
2.2 kV
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Setpoint
1 N
Short-time current
0.3 kA
Length
66 mm
Connection
1 level
Max. cross section for cable lug connection
2.5 mm²
Screw thread
M3
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
ECLASS 5.0
27141100
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Insulating material
PA
Potentials
1
Overvoltage category
III
Nominal current IN
24 A
Open side panel
Yes
Result of power-frequency withstand voltage test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
Height NS 35/7,5
51 mm
Stripping length
The stripping length depends on the specification provided by the cable lug manufacturer.
Hole diameter, min.
3.2 mm
Bolt diameter
3 mm
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141100
ECLASS 7.0
27141120
ETIM 2.0
EC000897
UNSPSC 11
39121410
UNSPSC 19.0
39121410
Conductor cross section short circuit testing
2.5 mm²
End cover width
2.2 mm
Height NS 35/15
58.5 mm
AWG max
14
Tightening torque, min
0.6 Nm
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 4.0
27141100
ETIM 4.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
ECLASS 6.0
27141100
ECLASS 9.0
27141120
ETIM 7.0
EC000897
ETIM 6.0
EC000897
UNSPSC 12.01
39121410
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 11.0
27141120