3047663 Phoenix Contact Terminal Blocks

Product Details

• Potentials
  1
• Insulating material
  PA
• Overvoltage category
  III
• Nominal voltage UN
  1000 V
• Finger protection
  guaranteed
• Power frequency withstand voltage setpoint
  2.2 kV
• Result of tight fit on support
  Test passed
• Short circuit stability result
  Test passed
• Number of levels
  1
• Flammability rating according to UL 94
  V0
• Degree of pollution
  3
• Maximum load current
  101 A (with 25 mm² conductor cross section)
• Result of power-frequency withstand voltage test
  Test passed
• Bending test turns
  135
• Conductor cross section tensile test
  25 mm²
• Requirements, voltage drop
  U1 ≤ 3,2 mVU2 ≤ 1,5 x U1dT ≤ 45 K
• Short-time current
  1.92 kA
• Nominal cross section
  16 mm²
• Area of application
  Railway industry
• Insulating material group
  I
Shock protection test specification
IEC 60529:2001-02
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Tractive force setpoint
135 N
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
16 mm²
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Number of connections
2
Rated surge voltage
8 kV
Nominal current IN
76 A
Open side panel
Yes
Surge voltage test setpoint
9.8 kV
Bending test rotation speed
10 rpm
Bending test conductor cross section/weight
1.5 mm² / 0.4 kg
Result of temperature-rise test
Test passed
Color
black/yellow
Maximum power dissipation for nominal condition
2.43 W
Back of the hand protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Tight fit on carrier
NS 32/NS 35
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Proof of thermal characteristics (needle flame) effective duration
30 s
Shock form
Half-sine
UNSPSC 20.0
39121410
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
End cover width
2.2 mm
Height NS 35/15
62.5 mm
Note
Note: Product releases, connection cross sections and notes on connecting aluminum cables can be found in the download area.
Connection in acc. with standard
IEC 60947-7-1
Min. AWG conductor cross section, flexible
16
2 conductors with same cross section, solid max.
6 mm²
2 conductors with same cross section, stranded max.
6 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141120
ETIM 3.0
EC000897
UNSPSC 12.01
39121410
Result of thermal test
Test passed
ASD level
6.12 (m/s2)2/Hz
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height
54.4 mm
Connection method
Screw connection
Tightening torque max
3 Nm
Conductor cross section solid max.
25 mm²
Conductor cross section flexible max.
25 mm²
Max. AWG conductor cross section, flexible
4
Conductor cross section flexible, with ferrule with plastic sleeve max.
16 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
10 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 5.0
27141100
ECLASS 7.0
27141120
UNSPSC 6.01
30211811
UNSPSC 11
39121410
Conductor cross section AWG min.
16
Conductor cross section flexible, with ferrule without plastic sleeve max.
16 mm²
Internal cylindrical gage
A7
ECLASS 10.0.1
27141120
ECLASS 4.1
27141100
ECLASS 5.1
27141100
ETIM 6.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
Test spectrum
Service life test category 2, bogie-mounted
Acceleration
30g
Number of shocks per direction
3
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
55.5 mm
Height NS 35/7,5
55 mm
Tightening torque, min
2.5 Nm
Conductor cross section AWG max.
4
Conductor cross section flexible, with ferrule without plastic sleeve min.
1 mm²
2 conductors with same cross section, solid min.
1 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.75 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
1 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 19.0
39121410
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test duration per axis
5 h
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Width
12.2 mm
Screw thread
M5
Stripping length
14 mm
Conductor cross section solid min.
1.5 mm²
Conductor cross section flexible min.
1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
1 mm²
2 conductors with same cross section, stranded min.
1 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
6 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 6.0
27141100
ETIM 4.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 18.0
39121410