3047660 Phoenix Contact Terminal Blocks

Product Details

• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
  0.5 mm²
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• ECLASS 5.0
  27141100
• Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
  2.5 mm²
• Permissible humidity (storage/transport)
  30 % ... 70 %
• ECLASS 10.0.1
  27141120
• ECLASS 4.0
  27141100
• ECLASS 5.1
  27141100
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• ECLASS 4.1
  27141100
• ECLASS 7.0
  27141120
• ETIM 4.0
  EC000897
• UNSPSC 6.01
  30211811
• Potentials
  1
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  6 mm²
• Internal cylindrical gage
  A6
• China RoHS
  Environmentally Friendly Use Period = 50 years
• ECLASS 11.0
  27141120
ECLASS 6.0
27141100
Number of levels
1
Overvoltage category
III
Maximum power dissipation for nominal condition
1.82 W
Result of surge voltage test
Test passed
Bending test turns
135
Tight fit on carrier
NS 35
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Conductor cross section short circuit testing
10 mm²
ETIM 3.0
EC000897
ETIM 6.0
EC000897
UNSPSC 11
39121410
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
Flammability rating according to UL 94
V0
Degree of pollution
3
Nominal current IN
57 A
Finger protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tractive force setpoint
20 N
Setpoint
5 N
Short-time current
1.2 kA
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Nominal cross section
10 mm²
Insulating material
PA
Insulating material group
I
Open side panel
Yes
Surge voltage test setpoint
9.6 kV
Result of flexion and pull-out test
Test passed
Result of thermal test
Test passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
47.7 mm
Screw thread
M4
Note
Note: Product releases, connection cross sections and notes on connecting aluminum cables can be found in the download area.
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
10 mm²
2 conductors with same cross section, stranded min.
0.5 mm²
ETIM 7.0
EC000897
UNSPSC 18.0
39121410
UNSPSC 12.01
39121410
Color
black/yellow
Rated surge voltage
8 kV
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of power-frequency withstand voltage test
Test passed
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Tensile test result
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Proof of thermal characteristics (needle flame) effective duration
30 s
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
10.2 mm
Height
46.9 mm
Tightening torque max
1.8 Nm
Conductor cross section AWG max.
6
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
2 conductors with same cross section, solid max.
4 mm²
2 conductors with same cross section, stranded max.
4 mm²
ETIM 2.0
EC000897
UNSPSC 21.0
39121410
Nominal voltage UN
1000 V
Back of the hand protection
guaranteed
Requirements, voltage drop
U1 ≤ 3,2 mVU2 ≤ 1,5 x U1dT ≤ 45 K
Ageing test for screwless modular terminal block temperature cycles
192
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/15
55 mm
Tightening torque, min
1.5 Nm
Conductor cross section solid max.
16 mm²
Min. AWG conductor cross section, flexible
20
2 conductors with same cross section, solid min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
ECLASS 9.0
27141120
Number of connections
2
Area of application
Railway industry
Maximum load current
76 A (with 16 mm² conductor cross section)
Bending test rotation speed
10 rpm
Conductor cross section tensile test
0.5 mm²
Result of voltage-drop test
Test passed
Short circuit stability result
Test passed
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/7,5
47.5 mm
Stripping length
10 mm
Conductor cross section solid min.
0.5 mm²
Conductor cross section flexible max.
16 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
End cover width
2.2 mm
Connection method
Screw connection
Connection in acc. with standard
CSA
Conductor cross section AWG min.
20
Max. AWG conductor cross section, flexible
6
Conductor cross section flexible, with ferrule with plastic sleeve max.
10 mm²
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410